Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE
RM2090E _54 Brake _060688 PARKING BRAKE _0297639 PARKING BRAKE CABLE A

PARKING BRAKE  PARKING BRAKE CABLE  INSTALLATION  


PROCEDURE

Hide 46430 1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.

Install the No. 3 parking brake cable assembly to the parking brake plate with the clamp.


b.

Install the No. 3 parking brake cable assembly to the body with the 4 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 46420 2.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY

HINT:

Use the same procedure for the No. 2 parking brake cable assembly as for the No. 3 parking brake cable assembly.


Hide 37100 3.INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

Hide 17420 4.INSTALL CENTER EXHAUST PIPE ASSEMBLY

a.

Install the center exhaust pipe assembly with the cushion rubber.


b.

Install the new gasket and the center exhaust pipe assembly with the 2 new nuts and the 2 bolts to tail exhaust pipe assembly.

Torque:
48 N*m (490 kgf*cm, 35 ft.*lbf)

HINT:
·

Do not reuse the gaskets.

·

Do not reuse the nuts.




c.

Install the new gasket and the front exhaust pipe assembly with the 2 nuts and the 2 bolts and the 2 compression springs to the center exhaust pipe assembly.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)

HINT:

Do not reuse the gaskets.



Hide 77642A 5.INSTALL NO. 2 FUEL TANK PROTECTOR (for Clamp Type)

Hide 77641A 6.INSTALL NO. 1 FUEL TANK PROTECTOR (for Clamp Type)

Hide 77643A 7.INSTALL NO. 3 FUEL TANK PROTECTOR (for Metal Type)

Hide 84550 8.INSTALL LOWER CASING BRACKET

a.

Install the lower casing bracket of the body with the 2 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 9.INSTALL CLAMP H/B

a.

Install the clamp H/B of the casing lower bracket with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 10.INSTALL PARKING BRAKE ASSEMBLY

Hide 46410 11.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

Hide 58810J 12.INSTALL CONSOLE BOX ASSEMBLY