51441
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
52119A
3.REMOVE FRONT BUMPER COVER
16470
4.REMOVE RADIATOR RESERVE TANK ASSEMBLY
| *1 | Radiator Reserve Tank Hose |
Disconnect the radiator reserve tank hose.
Remove the bolt and the radiator reserve tank assembly.
17750A
5.REMOVE AIR CLEANER INLET ASSEMBLY
88561J
6.REMOVE UPPER AIR INLET GRILLE (except Tropic)
53629
7.REMOVE HOOD LOCK CONTROL CABLE COVER (for Tropic)
53510
8.REMOVE HOOD LOCK ASSEMBLY
88561L
9.REMOVE LOWER AIR INLET GRILLE
88460
10.DISCONNECT COOLER CONDENSER ASSEMBLY
Remove the 4 bolts and the cooler condenser assembly.
Do not apply excessive force to the cooler condenser assembly or piping when removing the radiator assembly.
16571C
11.REMOVE NO. 1 RADIATOR HOSE
Loosen the 2 clips and remove the No. 1 radiator hose.
16572D
12.DISCONNECT NO. 2 RADIATOR HOSE
Loosen the clip and disconnect the No. 2 radiator hose.
32921D
13.REMOVE OIL COOLER INLET HOSE (for Automatic Transmission)
Loosen the 2 clips and remove the oil cooler inlet hose.
32922A
14.REMOVE OIL COOLER OUTLET HOSE (for Automatic Transmission)
Loosen the 2 clips and remove the oil cooler outlet hose.
53205
15.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
| *A | for LHD |
| *B | for RHD |
Disconnect the clamp from the hood lock control cable.
Remove the 5 bolts and the upper radiator support sub-assembly.
16400
16.REMOVE RADIATOR ASSEMBLY
Disconnect the cooling fan motor connector, then separate the wire harness clamp.
Remove the radiator assembly.
Do not allow the radiator to interfere with other parts.
Remove the 4 grommets from the radiator assembly.
Remove the 4 bolts and the fan with motor assembly.