Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY(for 2NR-VE) › from 2015.08
RM19Y0E _52 Drivetrain _002987 AXLE AND DIFFERENTIAL _0197236 REAR DIFFERENTIAL CARRIER ASSEMBLY(for 2NR-VE) A

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY(for 2NR-VE)  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 51443 2.REMOVE NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover)

Hide 4.DRAIN MANUAL TRANSMISSION OIL (for Manual Transmission)

Hide 5.DRAIN AUTOMATIC TRANSMISSION FLUID (for Automatic Transmission)

Hide 37110 6.REMOVE PROPELLER SHAFT ASSEMBLY

Hide 89546 7.SEPARATE REAR SPEED SENSOR LH

Hide 89545 8.SEPARATE REAR SPEED SENSOR RH

HINT:

Use the same procedure as for the LH side.


Hide 42403 9.REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

Hide 42312 10.REMOVE REAR AXLE SHAFT ASSEMBLY LH

Hide 42311L 11.REMOVE REAR AXLE SHAFT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 41101 12.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

a.

Support the differential carrier assembly with a jack.

NOTICE:

The differential is heavy, so support it securely with a jack.



b.
C145166

Remove the 10 bolts and the differential carrier assembly.

NOTICE:
·

Be careful not to damage the contact surface when removing the differential carrier assembly.

·

Be careful that the remaining oil may spill when removing the differential carrier assembly.