1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM
2.REMOVE FRONT BUMPER ASSEMBLY
52611
3.REMOVE FRONT BUMPER ENERGY ABSORBER
52021
4.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
17750A
5.REMOVE INLET AIR CLEANER ASSEMBLY
G9257
6.REMOVE NO. 5 INVERTER BRACKET
16470
7.REMOVE RADIATOR RESERVE TANK ASSEMBLY
53510
8.REMOVE HOOD LOCK ASSEMBLY
53216A
9.REMOVE UPPER RADIATOR SUPPORT
53293C
10.REMOVE RADIATOR SIDE DEFLECTOR RH
53294C
11.REMOVE RADIATOR SIDE DEFLECTOR LH
Disengage the 3 claws and guide, and remove the radiator side deflector LH as shown in the illustration.
88711
12.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88710E
13.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
Remove the bolt and disconnect the air conditioner tube and accessory assembly from the cooler condenser assembly.
Remove the O-ring from the air conditioner tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88460
14.REMOVE COOLER CONDENSER ASSEMBLY
Remove the 4 bolts.
Pull the radiator assembly in the direction indicated by the arrow.
Remove the 2 bolts.
Remove the cooler condenser assembly as shown in the illustration.