86160P
1.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
Connect the connector.
| *A | RH Side |
| *B | LH Side |
Install the front No. 2 speaker assembly with the 2 screws.
Do not touch the speaker cone.
Install the screws in the order shown in the illustration.
55409F
2.INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
62211
3.INSTALL FRONT PILLAR GARNISH
62311B
4.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LH side: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
for RH side: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
86160J
5.INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)
Connect the connector.
Install the front No. 3 speaker assembly with the 2 screws.
Do not touch the speaker cone.
Install the screws in the order shown in the illustration.
55510F
6.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY (for 10 Speakers)
7.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for 10 Speakers)
55660
8.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for 10 Speakers)
9.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for 10 Speakers)
58804A
10.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for 10 Speakers)
58916
11.INSTALL BOX BOTTOM MAT (for 10 Speakers)
12.INSTALL REAR CONSOLE BOX ASSEMBLY (for 10 Speakers)
13.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for 10 Speakers)
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
64718C
14.INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for 10 Speakers)