Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for LHD) › 2018.04–2021.02
RM33A0E _54 Brake _065366 BRAKE SYSTEM (OTHER) _0319133 BRAKE BOOSTER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for LHD)  INSTALLATION  


PROCEDURE

Hide 44785 1.INSTALL BRAKE BOOSTER GASKET

a.

Install a new brake booster gasket to the brake booster assembly.


Hide 44610 2.INSTALL BRAKE BOOSTER ASSEMBLY

a.

Temporarily install the brake booster assembly to the vehicle body.

NOTICE:

Do not apply excessive force to the brake lines.



b.

Temporarily install the lock nut and brake master cylinder push rod clevis to the brake booster assembly.

NOTICE:

Fully tighten the lock nut when adjusting the brake pedal height.



c.

Install the 4 nuts to secure the brake booster assembly.

Torque:
12.8 N*m (131 kgf*cm, 9 ft.*lbf)


d.

for 6AR-FSE, A25A-FKS, 2GR-FKS:

i.

Connect the connector to the vacuum warning switch assembly.



Hide 47264A 3.INSTALL PUSH ROD PIN

Hide 44773F 4.CONNECT UNION TO CHECK VALVE HOSE (for 6AR-FSE, A25A-FKS, 2GR-FKS)

a.

Connect the union to check valve hose to the brake booster assembly and slide the clip to secure it.


Hide 44763A 5.INSTALL NO. 1 HOSE TO HOSE TUBE (for 2AR-FE)

a.
C375955

Install the No. 1 hose to hose tube to the vehicle body with the 2 nuts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


b.

Connect the check valve to connector tube hose to the brake booster assembly and slide the clip to secure it.


Hide 74404A 6.INSTALL BATTERY CLAMP SUB-ASSEMBLY

a.

for A25A-FKS:

i.
C373428

Install the battery clamp sub-assembly with the 3 bolts and nut.

Torque:
Bolt : 18.5 N*m (189 kgf*cm, 14 ft.*lbf)
Nut : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Engage the 4 clamps to the battery clamp sub-assembly.



b.

for 6AR-FSE, 2AR-FE, 2GR-FKS:

i.
C380324

Install the battery clamp sub-assembly with the 3 bolts and nut.

Torque:
Bolt : 18.5 N*m (189 kgf*cm, 14 ft.*lbf)
Nut : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Engage the 5 clamps to the battery clamp sub-assembly.



Hide 7.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for 6AR-FSE)

Hide 12601B 8.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (for 6AR-FSE)

Hide 9.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for 2AR-FE)

Hide 10.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for A25A-FKS)

Hide 12601B 11.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (for A25A-FKS)

Hide 12.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for 2GR-FKS)

Hide 53607A 13.INSTALL FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY

Hide 55708 14.INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Hide 55606 15.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 16.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 17.INSPECT AND ADJUST BRAKE PEDAL