Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM (for Start Function) › from 2018.04
RM33A0E _58 Vehicle Interior _065379 THEFT DETERRENT / KEYLESS ENTRY _0328237 SMART ENTRY AND START SYSTEM(for Start Function) Y

THEFT DETERRENT / KEYLESS ENTRY  SMART ENTRY AND START SYSTEM(for Start Function)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Replace parts related to the wireless door lock control system and smart entry and start system according to the inspection procedure.

·

If the wireless door lock control system and smart entry and start system do not operate, check the customize settings and make sure that the wireless door lock control system and smart entry and start system are not disabled.

·

The wireless door lock control system and smart entry and start system primarily use the following systems.

-

Power door lock control system

-

Wireless door lock control system

-

Smart entry and start system (for Entry Function)

-

Smart entry and start system (for Start Function)

Steering lock function

Immobiliser function



·

If 2 or more electrical key transmitter sub-assemblies are registered to the system, make sure to perform troubleshooting with all of them.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
a.

Confirm how the vehicle was brought to the workshop.

·

Vehicle was driven.

·

Vehicle was towed.


HINT:

The cause of the malfunction may be narrowed down by confirming whether the vehicle was driven or towed.



Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past malfunctions that seem unrelated may also help in some cases.

·

The following 5 items are important points for problem analysis:

What Vehicle model, system name
When Date and time, frequency, whether the problem occurred recently or has been occurring for a long time
Where Whether the problem occurs at specified location
Under what conditions? Whether the doors were locked or unlocked, whether the engine switch was on (IG), whether the engine was running
How did it happen? Ask the customer for details about the vehicle operating conditions, environment and malfunction.



Result:
Proceed to
NEXT



NEXT

3.BASIC CHECK
3.BASIC CHECK
a.

Measure the battery voltage.

Standard Voltage:

11 to 14 V


HINT:
·

A simple method to determine whether the battery is depleted is to operate the horn.

·

If the battery voltage is below 11 V, recharge or replace the battery.




b.

Check for blown fuses, open or shorted wire harnesses, improperly connected connectors and other problems in areas that can be visually inspected.


c.

Check the connection of each connector and check them for deformation or damage.


Result:
Proceed to
NEXT



NEXT

4.CHECK DTCS AND SAVE OPERATION HISTORY
4.CHECK DTCS AND SAVE OPERATION HISTORY
a.

Using the GTS, enter the following menus: System Select / Health Check


HINT:
·

If DTCs are output, perform troubleshooting for the DTCs.

·

Save all output DTCs and operation history.

·


Result:
Result Proceed to
No DTCs are output A
Wireless door lock system and smart entry and start system DTCs are output B
DTCs other than wireless door lock system and smart entry and start system DTCs are output C



A

5.CHECK PROBLEM SYMPTOMS

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

C

GO TO DIAGNOSTIC TROUBLE CODE CHART

5.CHECK PROBLEM SYMPTOMS
a.

Result:
Result Proceed to
The problem symptom can be confirmed A
The problem symptom cannot be confirmed B



A

6.CHECK CUSTOMIZE ITEMS

B

6.CHECK CUSTOMIZE ITEMS
a.

Use the following customize setting methods to confirm that the smart entry and start system is enabled.

·

Using the GTS

·

Using the multi-display

·

Using manual operation


Check the customize settings.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>SMART ENTRY AND START SYSTEM (for Entry Function)>CUSTOMIZE PARAMETERS


b.

Use the following customize setting methods to confirm that the wireless door lock system is enabled.

·

Using the GTS

·

Using the multi-display


Check the customize settings.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Entry and Start System)>CUSTOMIZE PARAMETERS


HINT:
·

Even when the smart entry and start system is disabled by a customize setting, the engine can be started by an emergency key operation.

·

If the smart entry and start system or wireless door lock control system is disabled, all entry and start functions or wireless functions will not operate.



Result:
Result Proceed to
Wireless door lock control system and smart entry and start system are enabled A
Smart entry and start system is disabled B
Wireless door lock system is disabled C



A

7.CHECK POWER DOOR LOCK CONTROL SYSTEM

B

C

7.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Power door lock control system operates properly A
Power door lock control system does not operate properly B



A

8.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

B

GO TO POWER DOOR LOCK CONTROL SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

8.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

Result:
Result Proceed to
All functions operate properly*1 A
All functions operate properly*2 B
Wireless lock/unlock functions do not operate (entry and start functions also do not operate)*1 C
Wireless lock/unlock functions do not operates (entry and start functions operate)*1 D
Only luggage door open function does not operate E
Door ajar warning function does not operate F
Answer-back (buzzer sounds*3 and hazard lights flash) function does not operate G
Door locks or unlocks, even though wireless lock/unlock function was not operated H


*1: w/ Entry Function

*2: w/o Entry Function

*3: w/ Wireless Door Lock Buzzer Answer-back Function



A

9.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)

B

10.CHECK SMART ENTRY AND START SYSTEM (for Start Function)

C

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions and Wireless Functions do not Operate)

D

REPLACE ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY

E

GO TO LUGGAGE COMPARTMENT DOOR OPENER SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

F

GO TO LIGHTING SYSTEM (Front/Rear Door Courtesy Switch Circuit)

G

H

GO TO POWER DOOR LOCK CONTROL SYSTEM (Improper Operation)

9.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)
a.

Result:
Result Proceed to
All functions operate properly A
Entry lock/unlock functions do not operate for all doors (wireless function also does not operate) B
Entry lock/unlock functions do not operate for all doors (wireless function operates)) C
Entry lock/unlock functions do not operate only for driver side door D
Entry lock/unlock functions do not operate only for front passenger side door E
Entry lock function does not operate only for driver side door (unlock function operates) F
Entry lock function does not operate only for passenger side door (unlock function operates) G
Entry unlock function does not operate only for driver side door (lock function operates) H
Entry unlock function does not operate only for passenger side door (lock function operates) I
Luggage door open function does not operate J
Luggage lock-in prevention function does not operate (Luggage door does not open) K
Smart entry and start system exterior warning and answer-back buzzer do not sound* L
Smart entry and start system interior warning does not sound M
Touching unlock sensor for certain period of time does not unlock all doors N


*: w/ Wireless Door Lock Buzzer Answer-back Function



A

10.CHECK SMART ENTRY AND START SYSTEM (for Start Function)

B

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions and Wireless Functions do not Operate)

C

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions do not Operate, but Wireless Functions Operate)

D

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Lock and Unlock Functions do not Operate)

E

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Lock and Unlock Functions do not Operate)

F

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Lock Function does not Operate)

G

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Lock Function does not Operate)

H

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Unlock Function does not Operate)

I

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Unlock Function does not Operate)

J

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Luggage Compartment Door Entry Unlock Function does not Operate when Key is Outside Luggage Compartment)

K

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Key Luggage Compartment Lock-in Prevention Function does not Operate)

L

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Entry Exterior Alarm and Answer-back Buzzer do not Sound)

M

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Entry Interior Alarm does not Sound)

N

GO TO SMART ENTRY AND START SYSTEM (for Entry Function) (Touching Unlock Sensor for Certain Period of Time does not Unlock All Doors)

10.CHECK SMART ENTRY AND START SYSTEM (for Start Function)
a.

Result:
Engine started
Result Proceed to
All functions operate properly A
Power source mode changing function does not operate correctly (power source mode cannot be changed to on (ACC), but can be changed to on (IG)) B
Steering lock function does not operate C
Security indicator light does not blink D

Engine did not start
Result Proceed to
Push-button start function does not operate E
Immobiliser function does not operate F
Steering wheel cannot be unlocked G
Power source mode changing function does not operate (power source mode cannot be changed to on (ACC) or on (IG)) H
Power source mode changing function does not operate correctly (power source mode can be changed to on (ACC), but not on (IG)) I
Immobiliser function does not operate (security indicator light does not turn off) J



A

11.CHECK ELECTRICAL KEY REGISTRATION FUNCTION

B

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (ACC))

C

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Steering Lock does not Lock)

D

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Security Indicator Light Does not Blink)

E

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Engine does not Start)

F

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Immobiliser System does not Operate Properly)

G

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Unable to Unlock Steering Wheel (Engine cannot Start))

H

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG and ACC))

I

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG))

J

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Immobiliser System does not Operate Properly)

11.CHECK ELECTRICAL KEY REGISTRATION FUNCTION

Result:
Result Proceed to
Electrical key registration function operates properly A
Cannot register new keys B
Cannot register additional keys C
Additional key registration display is not displayed D



A

B

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (New Key cannot be Registered)

C

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (Additional Key cannot be Registered)

D

GO TO SMART ENTRY AND START SYSTEM (for Start Function) (New Key Registration Warning Message is not Displayed)