Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for LHD) › from 2021.02
RM33A0E _54 Brake _065366 BRAKE SYSTEM (OTHER) _0319133 BRAKE BOOSTER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for LHD)  INSTALLATION  


PROCEDURE

Hide 44785 1.INSTALL BRAKE BOOSTER GASKET

a.

Install a new brake booster gasket to the brake booster assembly.


Hide 44610 2.INSTALL BRAKE BOOSTER ASSEMBLY

a.

Temporarily install the brake booster assembly to the vehicle body.

NOTICE:

Do not apply excessive force to the brake lines.



b.

Temporarily install the lock nut and brake master cylinder push rod clevis to the brake booster assembly.

NOTICE:

Fully tighten the lock nut when adjusting the brake pedal height.



c.

Install the 4 nuts to secure the brake booster assembly.

Torque:
12.8 N*m (131 kgf*cm, 9 ft.*lbf)


d.

Connect the connector to the vacuum warning switch assembly.


Hide 47264A 3.INSTALL PUSH ROD PIN

Hide 44773F 4.CONNECT UNION TO CHECK VALVE HOSE

a.

Connect the union to check valve hose to the brake booster assembly and slide the clip to secure it.


Hide 74404A 5.INSTALL BATTERY CLAMP SUB-ASSEMBLY

a.
C373428

for A25A-FKS, M20A-FKS:

i.

Install the battery clamp sub-assembly with the 3 bolts and nut.

Torque:
Bolt : 18.5 N*m (189 kgf*cm, 14 ft.*lbf)
Nut : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Engage the 4 clamps to the battery clamp sub-assembly.



b.

for 2GR-FKS:

i.
C380324

Install the battery clamp sub-assembly with the 3 bolts and nut.

Torque:
Bolt : 18.5 N*m (189 kgf*cm, 14 ft.*lbf)
Nut : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Engage the 5 clamps to the battery clamp sub-assembly.



Hide 6.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for A25A-FKS)

Hide 12601B 7.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (for A25A-FKS)

Hide 8.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for 2GR-FKS)

Hide 9.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for M20A-FKS)

Hide 12601B 10.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (for M20A-FKS)

Hide 53607A 11.INSTALL FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY

Hide 55708 12.INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Hide 55606 13.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 14.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 15.INSPECT AND ADJUST BRAKE PEDAL