Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the RHD vehicles.
1.DRAIN ENGINE COOLANT (for 14B)
2.DRAIN ENGINE COOLANT (for 1HZ)
3.DRAIN ENGINE COOLANT (for 2TR-FE)
4.DRAIN ENGINE COOLANT (for N04C-UH, N04C-VL, N04C-VQ)
for N04C-UH
Click hereEngine / Hybrid System>N04C-UH (COOLING)>COOLANT>REPLACEMENT
for N04C-VL
Click hereEngine / Hybrid System>N04C-VL (COOLING)>COOLANT>REPLACEMENT
for N04C-VQ
Click hereEngine / Hybrid System>N04C-VQ (COOLING)>COOLANT>REPLACEMENT
5.REMOVE REAR SEAT ASSEMBLY RH
for 2-Passenger Seat with Separate Type Seatback
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Separate Type Seatback)>REMOVAL
for 2-Passenger Seat with Bench Type Seatback
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Bench Type Seatback)>REMOVAL
for Single-Passenger Seat with 3 Point Type Seat Belt
for Single-Passenger Seat without 3 Point Type Seat
6.REMOVE REAR SEAT ASSEMBLY LH
for 2-Passenger Seat with Separate Type Seatback
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Separate Type Seatback)>REMOVAL
for 2-Passenger Seat with Bench Type Seatback
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Bench Type Seatback)>REMOVAL
for Single-Passenger Seat with 3 Point Type Seat Belt
for Single-Passenger Seat without 3 Point Type Seat
87209
7.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, RHD)
Type A:
Remove the bolt.
Detach the guide.
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
Type B:
Remove the bolt.
Detach the guide.
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87209
8.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, LHD)
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87209
9.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, RHD)
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87209
10.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, LHD)
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87120
11.REMOVE REAR HEATER ASSEMBLY
for Front Side:
Remove the 3 bolts and rear heater assembly.
for Rear Side:
Remove the 2 bolts, nut and rear heater assembly.
|
Bolt |
|
Nut |