1.CHECK INJECTOR COMPENSATION CODE
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
58701A
3.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
51441D
4.REMOVE NO. 1 ENGINE UNDER COVER
5.DRAIN ENGINE OIL
6.DRAIN ENGINE COOLANT
16400
7.REMOVE RADIATOR ASSEMBLY
27020
8.REMOVE GENERATOR ASSEMBLY
17141
9.REMOVE EXHAUST MANIFOLD
23670
10.REMOVE INJECTOR ASSEMBLY
17111
11.REMOVE INTAKE MANIFOLD
16577C
12.REMOVE RADIATOR PIPE
87246B
13.DISCONNECT OUTLET HEATER WATER HOSE B
87245B
14.DISCONNECT INLET HEATER WATER HOSE B
87208L
15.REMOVE WATER PIPE SUB-ASSEMBLY
16.REMOVE NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY
16206
17.REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY
18.REMOVE NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY
19.SET NO. 1 CYLINDER TO TDC/COMPRESSION
13901
20.REMOVE NO. 1 VALVE ROCKER SHAFT SUB-ASSEMBLY
13781
21.REMOVE VALVE PUSH ROD
13819
22.REMOVE VALVE BRIDGE
11101
23.REMOVE CYLINDER HEAD SUB-ASSEMBLY
Remove the 22 cylinder head bolts in the order shown in the illustration.
Lift and remove the cylinder head sub-assembly from the cylinder block sub-assembly.
Remove the 8 valve lifters.
Organize the parts so that each parts location can be remembered for reassembly.
11115
24.REMOVE CYLINDER HEAD GASKET
Remove the cylinder head gasket.