1.REMOVE FRONT WHEEL LH
53702
2.REMOVE FRONT FENDER APRON LH
51441
3.REMOVE NO. 1 ENGINE UNDER COVER
4.DRAIN ENGINE COOLANT
5.DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID
53292A
6.REMOVE UPPER RADIATOR SUPPORT SEAL
16571
7.DISCONNECT NO. 1 RADIATOR HOSE
8.DISCONNECT WATER BY-PASS HOSE
Release the 2 clamps and disconnect the 2 water by-pass hoses from the oil cooler.
9.REMOVE OIL COOLER HOSE
Release the 2 clamps and disconnect the 2 oil cooler hoses from the oil cooler tube sub-assembly.
Release the 4 clamps and remove the 2 oil cooler hoses from the oil cooler and continuously variable transaxle assembly.
Release the 3 clamps and remove the 3 inlet oil cooler hoses from the outlet oil cooler tube.
| *1 | Outlet No. 1 Oil Cooler Hose |
| *2 | Inlet Oil Cooler Hose |
| *3 | Outlet Oil Cooler Tube |
| *4 | Clamp |
Remove the 6 clamps from the 3 inlet oil cooler hoses.
Release the 3 clamps and remove the 3 outlet No. 1 oil cooler hoses from the outlet oil cooler tube.
Remove the 6 clamps from the 3 outlet No. 1 oil cooler hoses.
33493B
10.REMOVE OIL COOLER
Remove the 3 bolts and oil cooler from the continuously variable transaxle assembly.