2011-2016 FJ Cruiser · Service Manual BRAKE

VSC OFF Indicator Light does not Come ON

Circuit diagnosis · Vehicles built Jul 2007 – Jul 2008

Versions by build date: Jul 2007 – Jul 2008 Aug 2008 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 Aug 2012 – Oct 2012 from Nov 2012

DESCRIPTION

Click here.

WIRING DIAGRAM

Click here.

INSPECTION PROCEDURE

NOTICE:
When replacing the master cylinder solenoid, perform zero point calibration (Click here).


1. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (VSC OFF INDICATOR LIGHT)
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the tester on.

  1. Select the following menu items: Chassis / ABS/VSC/TRC/ Active TestSelect the "Turns VSC/TRC OFF indicator light" in the Active Test and operate the VSC OFF indicator light using the intelligent tester.

    ACTIVE TEST: ABS/VSC/TRC 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    VSC/TRC OFF Indicator Light
    VSC OFF indicator
    VSC OFF indicator ON or OFF
    Observe combination meter

  1. Check that the VSC OFF indicator light turns on and off in the combination meter using the intelligent tester.

    OK:
    The VSC OFF indicator light turns ON and OFF in accordance with the intelligent tester operation.



NG
Go to step 2
OK

REPLACE MASTER CYLINDER SOLENOID (Click here)

2. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - COMBINATION METER)

  1. C135294E02
    Disconnect the skid control ECU connector.

  1. Disconnect the combination meter connector.

  1. Measure the resistance.

    Standard resistance:
    Tester Connection
    Specified Condition
    A4-35 (WT) - E14-5 (TROF)
    Below 1 Ω
    A4-35 (WT) - Body ground
    10 kΩ or higher



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


3. INSPECT COMBINATION METER ASSEMBLY
  1. Check the combination meter system (Click here).

    OK:
    Combination meter is normal.



NG
REPLACE COMBINATION METER ASSEMBLY (Click here)
OK

REPLACE MASTER CYLINDER SOLENOID (Click here)


← VSC OFF Indicator Light Remains ON (from Nov 2012)VSC OFF Indicator Light does not Come ON (Aug 2008 – Jul 2009) →