PROBLEM SYMPTOMS TABLE
Troubleshooting · Vehicles built Aug 2008 – Oct 2010
Versions by build date: Aug 2008 – Oct 2010 from Nov 2010
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom |
Suspected Area |
See page |
| When shift lever is in R position, rear view monitor image is not displayed. |
Back door courtesy switch circuit |
Click here
|
| Reverse signal circuit |
Click here
|
|
| Display signal circuit between inner rear view mirror assembly and television camera assembly |
Click here
|
|
| Inner rear view mirror assembly |
Click here
|
|
| Inner rear view mirror power source circuit |
Click here
|
|
| When shift lever is in R position, rear view monitor image is not displayed (Screen is blue for 3 seconds and then disappears). |
Display signal circuit between inner rear view mirror assembly and television camera assembly |
Click here
|
| When shift lever is not in R position, rear view monitor image is displayed. |
Reverse signal circuit |
Click here
|
| Inner rear view mirror assembly |
Click here
|
|
| Problem with the rear view monitor image (color, disorder of picture). |
Display signal circuit between inner rear view mirror assembly and television camera assembly |
Click here
|
| Inner rear view mirror assembly |
Click here
|
- HINT:
- When the amber LED light is illuminated on the inner rear view mirror assembly with the ignition switch ON and the shift lever position R, this indicates that the monitor image has been canceled manually. Check if the image will be displayed by pressing the AUTO button.