DIAGNOSIS SYSTEM
Troubleshooting · Vehicles built May 2007 – Jul 2008
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 Jul 2010 – Jun 2012 from Jul 2012
| BUS CHECK (COMMUNICATION MALFUNCTION DTC) |
- HINT:
- Only CAN communication system DTCs for each ECU can be displayed on the intelligent tester.
Select "Bus Check" from the "System Select" screen on the intelligent tester.

Select "Communication Malfunction DTC" from the "Bus Check" screen, and then select "Enter".

Select the system of the DTC to be checked and select "Details".

| BUS CHECK (COMMUNICATION BUS CHECK) |
- HINT:
- The ECUs and sensors that are properly connected to the CAN communication system can be displayed using the intelligent tester.
Select "Communication Bus Check" from the "Bus Check" screen.

The screen displays the ECUs and sensors that are properly connected to the CAN communication system.

- HINT:
- If any properly connected ECUs or sensors are not displayed, there is a communication stop in the system.
"There is no system connected to the communication bus" is displayed if there are no ECUs or sensors connected to the CAN bus.

| CHECK FOR INSTALLED SYSTEMS (ECUS AND SENSORS) THAT ADOPT CAN COMMUNICATION |
Systems (ECUs, sensors) that adopt CAN communication vary depending on the vehicle's optional settings. Check which systems (ECUs, sensors) are installed on the vehicle.
- HINT:
- ECUs and sensors that are connected to the LIN communication system and the local CAN system are also displayed.
ECU/Sensor name
Check method
ECM
Installed on all vehicles
Combination meter
Installed on all vehicles
Skid control ECU
Installed on all vehicles
Steering angle sensor
Installed on all vehicles
Yaw rate sensor
Installed on all vehicles
Power steering ECU
Installed on all vehicles
Center airbag sensor assembly
Installed on all vehicles
Air conditioning amplifier
Installed on all vehicles
Main body ECU
Installed on all vehicles
Television camera ECU
w/ Parking assist monitor system
Certification ECU
w/ Smart entry and start system
Back door ECU
w/ Power back door system
| DTC TABLE BY ECU |
- HINT:
- In the CAN communication system, CAN communication system DTCs can be displayed by the ECU using the intelligent tester.
- If CAN communication system DTCs are output, trouble cannot be determined only by the DTCs. Perform troubleshooting according to "HOW TO PROCEED WITH TROUBLESHOOTING". (Click here)
- In the CAN communication system, CAN communication system DTCs can be displayed by the ECU using the intelligent tester.
SKID CONTROL ECU
- HINT:
- DTC communication uses the CAN communication system.
DTC No.
Detection Item
U0073
Control Module Communication Bus Off
U0100
Lost Communication with ECM/PCM "A"
U0123
Lost Communication with Yaw Rate Sensor Module
U0124
Lost Communication with Lateral Acceleration Sensor Module
U0126
Lost Communication with Steering Angle Sensor Module
AIR CONDITIONING AMPLIFIER
- HINT:
- DTC communication uses the CAN communication system.
- The following DTC is output only for current malfunctions.
- DTC communication uses the CAN communication system.
DTC No.
Detection Item
B1499
Multiplex Communication Circuit
COMBINATION METER
- HINT:
- DTC communication uses the CAN communication system.
DTC No.
Detection Item
U0100
Lost Communication with ECM/PCM "A"
U0129
Lost Communication with Brake System Control Module
POWER STEERING ECU
- HINT:
- DTC communication uses the CAN system.
DTC No.
Detection Item
U0073
Control Module Communication Bus Off
U0100
Lost Communication with ECM
U0129
Lost Communication with Anti-lock Brake System (ABS) Control Module
MAIN BODY ECU
- HINT:
- DTC communication uses the CAN system.
DTC No.
Detection Item
U0327
Software Incompatibility with Vehicle Security Control Module
U1002
Lost Communication with Gateway Module
TELEVISION CAMERA ECU
- HINT:
- DTC communication uses the CAN system.
DTC No.
Detection Item
5C-42
Steering angle sensor communication error
ECM
- HINT:
- The ECM is connected to the CAN communication system, but CAN communication DTCs are not output.
CENTER AIRBAG SENSOR
- HINT:
- The center airbag sensor is connected to the CAN communication system, but CAN communication DTCs are not output.
STEERING ANGLE SENSOR
- HINT:
- The steering angle sensor is connected to the CAN communication system, but CAN communication DTCs are not output.
YAW RATE SENSOR
- HINT:
- The yaw rate sensor is connected to the CAN communication system, but CAN communication DTCs are not output.
CERTIFICATION ECU (w/ Smart entry and start system)
- HINT:
- The certification ECU is connected to the CAN communication system, but CAN communication DTCs are not output.
BACK DOOR ECU (w/ Power back door system)
- HINT:
- The certification ECU is connected to the CAN communication system, but CAN communication DTCs are not output.
| DTC COMBINATION TABLE |
CAN No. 1 Bus
DTC
Trouble Mode
Output from
Output DTC
ECM Communication Stop Mode
Skid Control ECU Communication Stop Mode
Steering Angle Sensor Communication Stop Mode
Yaw Rate Sensor Communication Stop Mode
Combination Meter ECU Communication Stop Mode
Skid Control ECU
U0073
X
○*1
X
X
X
U0100
○
○*1
X
X
X
U0123
X
○*1
X
○
X
U0124
X
○*1
X
○
X
U0126
X
○*1
○
X
X
Combination Meter
U0100
○
X
X
X
○*1
U0129
X
○
X
X
○*1
Power Steering ECU
U0100
○
X
X
X
X
U0129
X
○
X
X
X
- HINT:
- ○: Set
- X: Not set or may be set according to the malfunctioning part when one side of the CAN bus wire opens
- *1: Does not output it during communication error
- ○: Set
DTC
Trouble Mode
Output from
Output DTC
Air Conditioning Amplifier Communication Stop Mode
Center Airbag Sensor Communication Stop Mode
Power Steering ECU Communication Stop Mode
Television Camera ECU Communication Stop Mode
Skid Control ECU
U0073
X
X
X
X
U0100
X
X
X
X
U0123
X
X
X
X
U0124
X
X
X
X
U0126
X
X
X
X
Combination Meter
U0100
X
X
X
X
U0129
X
X
X
X
Power Steering ECU
U0100
X
X
○*1
X
U0129
X
X
○*1
X
- HINT:
- ○: Set
- X: Not set or may be set according to the malfunctioning part when one side of the CAN bus wire opens
- *1: Does not output it during communication error
- ECM Communication Stop Mode (Click here)
- Skid Control ECU Communication Stop Mode (Click here)
- Steering Angle Sensor Communication Stop Mode (Click here)
- Yaw Rate Sensor Communication Stop Mode (Click here)
- Air Conditioning Amplifier Communication Stop Mode (Click here)
- Combination Meter Communication Stop Mode (See page
Click here)
- Power Steering ECU Communication Stop Mode (Click here)
- Main Body ECU Communication Stop Mode (Click here)
- Center Airbag Sensor Communication Stop Mode (Click here)
- Television CameraECU Communication Stop Mode (Click here)
- ○: Set