2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (TRC OFF INDICATOR LIGHT)
Connect the intelligent tester to the DLC3.
Start the engine.
Select the Active Test mode on the intelligent tester (Click here).
ABS / VSC / TRC:
Tester Display
Test Part
Control Range
Diagnostic Note
TRC(TRAC) OFF Indicator Light
TRC OFF indicator light
Indicator light ON/OFF
Observe combination meter
Check that the TRC OFF indicator light on the combination meter turns on or off in accordance with the intelligent tester operation.
OK:
The TRC OFF indicator light turns on or off in accordance with the intelligent tester operation.
HINT:
If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step before replacing the part (Click here).