PROBLEM SYMPTOMS TABLE
Troubleshooting · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom |
Suspected Area |
See page |
| Main switch cannot be turned on (cruise control indicator light on combination meter does not illuminate) |
Cruise control switch circuit |
Click here
|
| Cruise main indicator light circuit |
Click here
|
|
| Harness or connector |
- |
|
| Combination meter |
Click here
|
|
| ECM |
Click here
|
|
| Vehicle speed setting cannot be performed (cruise control indicator light on combination meter illuminates when main switch is turned on, but turns off when operating SET function) |
Cruise control switch circuit |
Click here
|
| Combination meter |
Click here
|
|
| ECM |
Click here
|
|
| Vehicle speed setting cannot be performed (cruise control indicator light on combination meter illuminates when main switch is turned on, and remains illuminated when operating SET function) |
Cruise control switch circuit |
Click here
|
| Stop light switch circuit |
Click here
|
|
| Park/neutral position switch circuit*1 |
Click here
|
|
| Park/neutral position switch circuit*2 |
Click here
|
|
| Park/neutral position switch circuit*3 |
Click here
|
|
| Combination meter |
Click here
|
|
| Clutch switch circuit*4 |
Click here
|
|
| ECM |
Click here
|
|
| Vehicle speed sensor circuit |
Click here
|
|
| While the vehicle is driving with cruise control, the SET control is canceled (cruise control indicator light remains illuminated) |
Cruise control switch circuit |
Click here
|
| Vehicle speed sensor circuit |
Click here
|
|
| Stop light switch circuit |
Click here
|
|
| Combination meter |
Click here
|
|
| Park/neutral position switch circuit*1 |
Click here
|
|
| Park/neutral position switch circuit*2 |
Click here
|
|
| Park/neutral position switch circuit*3 |
Click here
|
|
| Clutch switch circuit*4 |
Click here
|
|
| ECM |
Click here
|
|
| Hunting (speed is not constant) |
Vehicle speed sensor circuit |
Click here
|
| ECM |
Click here
|
|
| Vehicle speed setting cannot be canceled (When Coast, Acceleration, Resume, Set speed change and Control switch are operated) |
Cruise control switch circuit |
Click here
|
| ECM |
Click here
|
|
| DTC is not output, or is output when it should not be |
Diagnosis circuit |
Click here
|
| ECM |
Click here
|
|
| Cruise control indicator light does not come on |
Cruise control switch circuit |
Click here
|
| Cruise main indicator light circuit |
Click here
|
|
| Combination meter |
Click here
|
|
| ECM |
Click here
|
*2: for A750E Automatic Transmission
*3: for A750F Automatic Transmission
*4: for Manual Transmission