Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 1GD-FTV, 2GD-FTV)
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0185864 CONDENSER(for 1GD-FTV, 2GD-FTV) A

HEATING / AIR CONDITIONING  CONDENSER(for 1GD-FTV, 2GD-FTV)  INSTALLATION  


PROCEDURE

Hide 88460 1.INSTALL COOLER CONDENSER ASSEMBLY

a.
E315902C01
0,0 0,0 false
V113147

Install in this Direction


Install the cooler condenser assembly.

NOTICE:

Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.



Hide 88716A 2.CONNECT COOLER REFRIGERANT LIQUID PIPE A

a.
E315900

Remove the vinyl tape from the cooler refrigerant liquid pipe A and the connecting part of the cooler condenser assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the cooler refrigerant liquid pipe A.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the cooler refrigerant liquid pipe A.

NOTICE:

Keep the O-ring and O-ring fitting surfaces free of foreign matter.



d.

Connect the cooler refrigerant liquid pipe A to the cooler condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 88711 3.CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
E315899

Remove the vinyl tape from the No. 1 cooler refrigerant discharge hose and the connecting part of the cooler condenser assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 cooler refrigerant discharge hose.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the No. 1 cooler refrigerant discharge hose.

NOTICE:

Keep the O-ring and O-ring fitting surfaces free of foreign matter.



d.

Connect the No. 1 cooler refrigerant discharge hose to the condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 16400 4.INSTALL RADIATOR ASSEMBLY

Hide 53294C 5.INSTALL RADIATOR SIDE DEFLECTOR LH

a.
E324131

w/ Energy Absorber:

Attach the claw to install the radiator side deflector LH.


b.
E324132

w/o Energy Absorber:

Attach the claw to install the radiator side deflector LH.


c.
E324133

for Steel Type Bumper:

Attach the claw to install the radiator side deflector LH.


Hide 53293C 6.INSTALL RADIATOR SIDE DEFLECTOR RH

a.
E324137

w/ Energy Absorber:

Attach the claw to install the radiator side deflector RH.


b.
E324138

w/o Energy Absorber:

Attach the claw to install the radiator side deflector RH.


c.
E324139

for Steel Type Bumper:

Attach the claw to install the radiator side deflector RH.


Hide 53205 7.INSTALL RADIATOR UPPER SUPPORT SUB-ASSEMBLY

a.
E315898

Connect each clamp to install the radiator upper support sub-assembly.


b.

Install the radiator upper support sub-assembly with the 4 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


c.
E315897

Install the No. 1 radiator air guide with 4 new clips.


Hide 53208A 8.INSTALL HOOD LOCK SUPPORT SUB-ASSEMBLY

a.
E315896

Install the hood lock support sub-assembly with the 3 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Attach each clamp.


c.
E315891

for Automatic Air Conditioning System:

i.

Attach the clamp to install the thermistor assembly (ambient temperature sensor).



Hide 86510 10.INSTALL HIGH PITCHED HORN ASSEMBLY

Hide 86520 11.INSTALL LOW PITCHED HORN ASSEMBLY

Hide 13. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT