Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › ENGINE UNIT › from 2016.01
RM3270E _51 Engine / Hybrid System _048915 1KD-FTV ENGINE MECHANICAL _0242490 ENGINE UNIT A

1KD-FTV ENGINE MECHANICAL  ENGINE UNIT  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the parts in the following chart (A), replace the No. 1 injection pipe sub-assembly, No. 2 injection pipe sub-assembly, No. 3 injection pipe sub-assembly, No. 4 injection pipe sub-assembly and/or fuel inlet pipe sub-assembly with new ones.

Replaced Parts (A) Pipes Requiring New Replacement
·

Injector assembly (including shuffling the injector assemblies between the cylinders)

·

Common rail assembly

·

Cylinder head sub-assembly


·

No. 1 injection pipe sub-assembly

·

No. 2 injection pipe sub-assembly

·

No. 3 injection pipe sub-assembly

·

No. 4 injection pipe sub-assembly


·

Supply pump assembly

·

Common rail assembly

·

Cylinder block sub-assembly

·

Cylinder head sub-assembly

·

Cylinder head gasket

·

Timing Gear Case Assembly


Fuel inlet pipe sub-assembly

·

After removing the No. 1 injection pipe sub-assembly, No. 2 injection pipe sub-assembly, No. 3 injection pipe sub-assembly, No. 4 injection pipe sub-assembly and fuel inlet pipe sub-assembly, clean them with a brush and compressed air.



PROCEDURE

Hide 12315 1.INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET LH

a.

Install the front No. 1 engine mounting bracket LH to the cylinder block sub-assembly with the 4 bolts.

Torque:
68 N*m (693 kgf*cm, 50 ft.*lbf)


Hide 12311 2.INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET RH

a.

Install the front No. 1 engine mounting bracket RH to the cylinder block sub-assembly with the 4 bolts.

Torque:
68 N*m (693 kgf*cm, 50 ft.*lbf)


Hide 44320 6.INSTALL VANE PUMP ASSEMBLY

a.

Install a new O-ring to the vane pump assembly.


b.

Install the vane pump assembly to the timing gear case assembly with the 2 nuts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


Hide 29300 7.INSTALL VACUUM PUMP ASSEMBLY

a.

Install 2 new O-rings to the vacuum pump assembly.


b.

Install the vacuum pump assembly to the timing gear cover with the 2 nuts.

Torque:
20.6 N*m (210 kgf*cm, 15 ft.*lbf)


Hide 15701C 8.INSTALL OIL COOLER COVER SUB-ASSEMBLY

Hide 19850 9.INSTALL GLOW PLUG ASSEMBLY

Hide 25617A 10.INSTALL NO. 2 EGR HOLE COVER PLATE

a.

Install a new gasket and the No. 2 EGR hole cover plate with the 2 nuts.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 22100 12.INSTALL FUEL SUPPLY PUMP ASSEMBLY

Hide 23810A 13.INSTALL COMMON RAIL ASSEMBLY

Hide 23804C 14.INSTALL FUEL INLET PIPE SUB-ASSEMBLY

Hide 15301 15.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 23770 16.INSTALL NO. 2 NOZZLE LEAKAGE PIPE ASSEMBLY

Hide 23704 17.INSTALL NO. 4 INJECTION PIPE SUB-ASSEMBLY

Hide 23701 18.INSTALL NO. 1, NO. 2 AND NO. 3 INJECTION PIPE SUB-ASSEMBLY

Hide 15601 19.INSTALL OIL FILTER SUB-ASSEMBLY

Hide 17873A 21.INSTALL NO. 2 INTAKE AIR CONNECTOR BRACKET

Hide 26100G 23.INSTALL DIESEL THROTTLE BODY ASSEMBLY

Hide 25861C 24.INSTALL VACUUM SWITCHING VALVE BRACKET

Hide 16331 25.INSTALL WATER OUTLET

a.
A352070C01
1.281,1.146 1,1.667 1,1.667 1,1.833 true 0.938,1.854 1.208,2.021 0.271,0.167 10 false *a
*a Claw


Install a new gasket and the water outlet to the cylinder head sub-assembly with the 2 bolts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)

HINT:

Make sure the claws of the gasket face the water outlet.



Hide 88431 28.INSTALL NO. 1 COMPRESSOR MOUNTING BRACKET

a.

Install the No. 1 compressor mounting bracket to the cylinder block sub-assembly with the 4 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 16620 29.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

a.
A352071C01
1.052,0.219 1.323,0.406 0.271,0.188 10 true *1 0.146,0.813 0.417,1 0.271,0.188 10 true *2 0.74,0.146 0.938,0.333 0.198,0.188 10 true *A 0.635,0.344 0.833,0.531 0.198,0.188 10 true *A
*1 Cylinder Block Sub-assembly
*2 V-ribbed Belt Tensioner


Install the V-ribbed belt tensioner assembly to the cylinder block sub-assembly with the 4 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

HINT:

Firmly press and hold the V-ribbed belt tensioner assembly against the cylinder block sub-assembly to eliminate any gaps in the areas labeled A in the illustration. Then uniformly tighten the 4 bolts.



Hide 12511C 30.INSTALL GENERATOR BRACKET

a.

Install the generator bracket with the bolt.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 27020 31.INSTALL GENERATOR ASSEMBLY

Hide 32.INSTALL NO. 2 IDLE PULLEY ASSEMBLY

Hide 33.INSTALL EXHAUST MANIFOLD WITH TURBOCHARGER

a.

Install a new gasket and the exhaust manifold with turbocharger to the cylinder head sub-assembly with the 8 spacers, 8 collars and 8 new nuts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


Hide 17167 36.INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 17945 39.INSTALL INTERCOOLER SUPPORT BRACKET

a.

Install the intercooler support bracket to the cylinder head sub-assembly with the 2 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


Hide 17946 40.INSTALL NO. 2 INTERCOOLER SUPPORT BRACKET

a.

Install the No. 2 intercooler support bracket to the cylinder head sub-assembly with the 2 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


Hide 13408 41.INSTALL CRANKSHAFT PULLEY SUB-ASSEMBLY

Hide 13505 42.INSTALL NO. 1 TIMING BELT IDLER SUB-ASSEMBLY

Hide 11322A 44.INSTALL NO. 1 TIMING BELT COVER