Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
Install the headlight dimmer switch assembly to the steering column, making sure that the stopper protrusions and cutout parts align.
Using needle-nose pliers, install the band clamp as shown in the illustration.
Connect the connector.
2.INSTALL WIPER AND WASHER SWITCH ASSEMBLY
3.INSTALL SPIRAL CABLE SUB-ASSEMBLY
4.INSTALL UPPER STEERING COLUMN COVER
5.INSTALL LOWER STEERING COLUMN COVER
6.INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL
7.INSTALL STEERING WHEEL ASSEMBLY