Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster) › 2015.06–2017.08
RM27T0E _54 Brake _053712 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0260912 VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster) J

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster)  VSC OFF Indicator Light Remains ON  


DESCRIPTION

The skid control ECU is connected to the combination meter via CAN communication.

Pressing the VSC OFF switch turns off traction control and pressing and holding this switch turns off traction and VSC controls. If VSC control turns off, the VSC OFF indicator light comes on.

WIRING DIAGRAM

C215177E02
5.255,2.035 5.543,2.256 0.288,0.221 10 A6 5.255,2.222 6.883,2.619 1.628,0.397 10 Brake Actuator Assembly (Skid Control ECU) 3.177,1.969 4.333,2.199 1.156,0.230 10 VSC OFF Switch 0.579,2.624 1.841,2.817 1.262,0.193 10 Combination Meter 0.662,3.157 3.084,3.369 2.422,0.212 10 : CAN Communication System 1.044,1.352 1.708,1.522 0.664,0.170 10 VSC OFF 1.298,1.849 1.584,2.014 0.286,0.165 10 IG 0.864,0.695 1.237,0.994 0.373,0.299 10 CPU 0.579,2.472 0.839,2.649 0.260,0.177 10 G6 3.177,1.779 3.442,1.948 0.265,0.170 10 G9 3.08,1.281 3.236,1.458 0.156,0.177 10 3 4.112,1.265 4.247,1.452 0.135,0.187 10 6 5.477,1.406 5.890,1.560 0.413,0.154 10 CSW 5.167,1.26 5.365,1.444 0.198,0.184 10 30

CAUTION / NOTICE / HINT

NOTICE:
·
·

As there may be malfunctions in the transfer system related to when the transfer operates in L4, check the transfer system first (See page Drivetrain>VF4BM (TRANSFER / 4WD / AWD)>TRANSFER SYSTEM>INSPECTION).



PROCEDURE

3.CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - VSC OFF SWITCH)

OK

4.READ VALUE USING INTELLIGENT TESTER (TRC/VSC OFF MODE)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR