Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
84550
1.INSTALL PARKING BRAKE SWITCH ASSEMBLY
46201E
2.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
Install the parking brake lever with the 2 bolts.
Install the parking brake lever support with the 2 bolts.
Install the straight pin to the parking brake lever.
Connect the No. 2 parking brake cable and No. 3 parking brake cable to the No. 1 parking brake pull rod.
Install the bush, compression spring and No. 1 parking brake pull rod to the parking brake lever with the adjusting nut.
Install the parking brake return spring.
Connect the parking brake switch connector.
3.INSPECT PARKING BRAKE LEVER TRAVEL
4.ADJUST PARKING BRAKE LEVER TRAVEL
58910C
5.INSTALL REAR CONSOLE BOX ASSEMBLY
for Automatic Transmission:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION).
for Manual Transmission:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION).
w/ Refrigerated Cool Box:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>INSTALLATION).
for Bench Seat Type:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Bench Seat Type)>INSTALLATION).