1.INSPECT PARKING BRAKE LEVER TRAVEL
Fully pull the parking brake lever to engage the parking brake.
Release the lever to disengage the parking brake.
Slowly pull the parking brake lever all the way and count the number of clicks.
5 to 7 clicks
If the parking brake lever travel is not as specified, adjust the parking brake shoe clearance and parking brake lever travel.
2.REMOVE REAR WHEEL
3.ADJUST PARKING BRAKE LEVER TRAVEL
for Automatic Transmission:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>REMOVAL).
for Manual Transmission:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>REMOVAL).
w/ Refrigerated Cool Box:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>REMOVAL).
for Bench Seat Type:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Bench Seat Type)>REMOVAL).
Completely release the parking brake lever.
Loosen the adjusting nut to completely release the parking brake cable.
Temporarily install the hub nuts.
Turn the shoe adjuster so that it expands until the disc locks.
|
Shoe Adjuster Contracts |
|
Shoe Adjuster Expands |
Turn the shoe adjuster so that it contracts until the disc can rotate smoothly.
8 notches
Check that there is no brake drag against the shoe.
Install the hole plug.
Remove the hub nuts.
Turn the adjusting nut until the parking brake lever travel becomes correct.
5 to 7 clicks
Operate the parking brake lever 3 to 4 times and check the parking brake lever travel.
5 to 7 clicks
Check whether the parking brake drags or not.
When operating the parking brake lever, check that the brake warning light comes on.
The brake warning light always illuminates at the first click.
for Automatic Transmission:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION).
for Manual Transmission:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION).
w/ Refrigerated Cool Box:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>INSTALLATION).
for Bench Seat Type:
Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Bench Seat Type)>INSTALLATION).
4.INSTALL REAR WHEEL