Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EGR COOLER › from 2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260620 EGR COOLER A

1GD-FTV EMISSION CONTROL  EGR COOLER  INSTALLATION  


PROCEDURE

Hide 25681 1.INSTALL NO. 1 EGR COOLER

a.

Install a new gasket and the No. 1 EGR cooler to the No. 2 EGR valve assembly with electric EGR control valve assembly with the 4 bolts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 2.INSTALL NO. 1 EGR COOLER AND NO. 2 EGR VALVE ASSEMBLY WITH ELECTRIC EGR CONTROL VALVE ASSEMBLY

a.

w/ Urea SCR System:

Temporarily install a new gasket and the No. 2 intercooler support bracket, No. 1 EGR cooler and No. 2 EGR valve assembly with electric EGR control valve assembly to the intake manifold with the 4 bolts.


b.

w/o Urea SCR System:

Temporarily install a new gasket and the No. 1 EGR cooler and No. 2 EGR valve assembly with electric EGR control valve assembly to the intake manifold with the 4 bolts.


c.

Using an E8 "TORX" socket wrench, install the 2 stud bolts to the No. 2 EGR valve assembly.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


d.
A454613C01
0.115,0.146 0.427,0.302 0.313,0.156 10 true *A 0.146,2.49 0.458,2.646 0.313,0.156 10 true *B 0.583,0.49 0.76,0.646 0.177,0.156 10 true 4 3.188,1.74 3.365,1.896 0.177,0.156 10 true 3 2.188,2.115 2.365,2.271 0.177,0.156 10 true 2 0.813,2.094 0.99,2.25 0.177,0.156 10 true 1 0.656,2.833 0.833,2.99 0.177,0.156 10 true 4 3.198,4.031 3.375,4.188 0.177,0.156 10 true 3 2.208,4.417 2.385,4.573 0.177,0.156 10 true 2 0.896,4.417 1.073,4.573 0.177,0.156 10 true 1
*A w/o Urea SCR System
*B w/ Urea SCR System


Tighten the 4 bolts in the order shown in the illustration.

HINT:

Make sure to tighten the bolts in the order.


Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 25601 4.CONNECT NO. 1 EGR PIPE SUB-ASSEMBLY

Hide 16209 5.CONNECT NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY

Hide 16206B 6.INSTALL NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY

a.

Install the No. 3 water by-pass pipe sub-assembly to the No. 1 EGR cooler with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the No. 9 water by-pass hose to the electric EGR control valve assembly, and slide the clamp to secure the hose.


c.

Connect the No. 8 water by-pass hose to the No. 3 water by-pass pipe sub-assembly, and slide the clamp to secure the hose.


d.

Connect the No. 4 fuel hose to the No. 3 water by-pass pipe sub-assembly.


Hide 44306 10.CONNECT VANE PUMP OIL RESERVOIR SUB-ASSEMBLY

Hide 77820 11.CONNECT UREA TANK FILLER PIPE ASSEMBLY (w/ Urea SCR System)

Hide 12632 12.INSTALL NO. 2 ENGINE COVER BRACKET (w/o Urea SCR System)

Hide 12633 13.INSTALL NO. 3 ENGINE COVER BRACKET (w/o Urea SCR System)

Hide 89421C 14.INSTALL DIESEL TURBO PRESSURE SENSOR

Hide 16278 16.INSTALL NO. 2 WATER BY-PASS PIPE

Hide 87209 17.INSTALL WATER HOSE SUB-ASSEMBLY

Hide 26100G 18.INSTALL DIESEL THROTTLE BODY ASSEMBLY

Hide 55781E 19.INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Hide 17940D 20.INSTALL INTERCOOLER ASSEMBLY (w/ Urea SCR System)