46590
1.DISCONNECT NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER
Refer to the procedures up to "Remove No. 2 Parking Brake Shoe Assembly with Parking Brake Shoe Lever" (See page Brake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>DISASSEMBLY).
77100U
2.REMOVE FUEL TANK SUB-ASSEMBLY
for 1GR-FE:
Remove the fuel tank sub-assembly (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL TANK>REMOVAL).
for 2TR-FE, for 3 Door:
Remove the fuel tank sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL TANK (for 3 Door)>REMOVAL).
for 2TR-FE, for 5 Door:
Remove the fuel tank sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL TANK (for 5 Door)>REMOVAL).
for 5L-E:
Remove the fuel tank sub-assembly (See page Engine / Hybrid System>5L-E (FUEL)>FUEL TANK>REMOVAL).
17420
3.REMOVE CENTER EXHAUST PIPE ASSEMBLY (for 3 Door)
Remove the center exhaust pipe assembly (See page Engine / Hybrid System>2TR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
58910C
4.REMOVE REAR CONSOLE BOX ASSEMBLY
for Automatic Transmission:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>REMOVAL).
for Manual Transmission:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>REMOVAL).
w/ Refrigerated Cool Box:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>REMOVAL).
for Bench Seat Type:
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Bench Seat Type)>REMOVAL).
46420
5.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
Loosen the adjusting nut.
Disconnect the No. 2 parking brake cable from the No. 1 parking brake pull rod.
Pinch the claws of the No. 2 parking brake cable and push the cable outside of the vehicle slightly.
Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.
for 3 Door:
Remove the 2 bolts, 3 nuts and No. 2 parking brake cable.
| *1 | No. 1 Parking Brake Cable Clamp | *2 | No. 3 Parking Brake Cable Clamp |
Detach the No. 1 parking brake cable clamp from the No. 2 parking brake cable.
Remove the No. 3 parking brake cable clamp from the body.
for 5 Door:
Remove the No. 1 parking brake cable heat insulator.
Remove the 5 bolts and No. 2 parking brake cable.
| *1 | No. 2 Parking Brake Cable Clamp | - | - |
Detach the No. 2 parking brake cable clamp from the No. 2 parking brake cable.
46430
6.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
Loosen the adjusting nut.
Disconnect the No. 3 parking brake cable from the No. 1 parking brake pull rod.
Pinch the claws of the No. 3 parking brake cable and push the cable outside of the vehicle slightly.
Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.
for 3 Door:
| *1 | No. 2 Parking Brake Cable Clamp | *2 | No. 4 Parking Brake Cable Clamp |
Remove the 2 bolts, 3 nuts and No. 3 parking brake cable.
Detach the No. 2 parking brake cable clamp from the No. 3 parking brake cable.
Remove the No. 4 parking brake cable clamp from the body.
for 5 Door:
| *1 | No. 3 Parking Brake Cable Clamp | *2 | - |
Remove the 4 bolts and No. 3 parking brake cable.
Detach the No. 3 parking brake cable clamp from the No. 3 parking brake cable.