C1203 ECM Communication Circuit Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
DESCRIPTION
The circuit is used to send control information from the skid control ECU (master cylinder solenoid) to the ECM, and engine control information from the ECM to the skid control ECU (master cylinder solenoid) via the CAN communication system.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1203 |
The engine/drivetrain specification and/or destination information from the ECM does not match the skid control ECU data. |
ECM |
INSPECTION PROCEDURE
| 1. CHECK ENGINE TYPE |
Check the engine type.
Result Result
Proceed to
1VD-FTV
A
1UR-FE
B
3UR-FE
C
|
|
||||
|
|
||||
| A | |
| 2. CHECK DTC (FOR ENGINE CONTROL SYSTEM) |
Check if the engine control system DTC is output (w/o DPF: Click here, w/ DPF: Click here).
Result Result
Proceed to
DTC is output
A
DTC is not output (w/o DPF)
B
DTC is not output (w/ DPF)
C
|
|
||||
|
|
||||
| A | ||
| ||
| 3. CHECK DTC (FOR ENGINE CONTROL SYSTEM) |
Check if the engine control system DTC is output (Click here).
Result Result
Proceed to
DTC is output
A
DTC is not output
B
|
|
||||
| A | ||
| ||
| 4. CHECK DTC (FOR ENGINE CONTROL SYSTEM) |
Check if the engine control system DTC is output (Click here).
Result Result
Proceed to
DTC is output
A
DTC is not output
B
|
|
||||
| A | ||
| ||
