INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER |
![]() ![]() |
- HINT:
- Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
Install the ultrasonic sensor retainer to the rear bumper.
- NOTICE:
- Do not damage the bumper with the protrusion when installing the retainer.
| 2. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER |
![]() ![]() |
- HINT:
- Use the same procedure to install the No. 3 ultrasonic sensor retainer on the other side.
Attach the claw to install the ultrasonic sensor retainer as shown in the illustration.
| 3. INSTALL NO. 2 ULTRASONIC SENSOR |
![]() ![]() |
- HINT:
- Use the same procedure to install the No. 2 ultrasonic sensor on the other side.
Attach the 2 claws to install the ultrasonic sensor.
Connect the connector.
| 4. INSTALL NO. 3 ULTRASONIC SENSOR |
![]() ![]() |
- HINT:
- Use the same procedure to install the No. 3 ultrasonic sensor on the other side.
Attach the 3 claws to install the ultrasonic sensor.
Connect the connector.
| 5. INSTALL NO. 2 FRAME WIRE |
for Standard:
Install the No. 2 frame wire (Click here).
w/ Towing Hitch:
Install the No. 2 frame wire (Click here).
w/ Pintle Hook:
Install the No. 2 frame wire (Click here).
| 6. INSTALL REAR BUMPER COVER |
for Standard:
Install the rear bumper cover (Click here).
w/ Towing Hitch:
Install the rear bumper cover (Click here).
w/ Pintle Hook:
Install the rear bumper cover (Click here).





