Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011from Jan 2012
1.
INSTALL NO. 1 FUEL TANK HEAT INSULATOR
Install the heat insulator with the 4 clips.
Install the fuel tube clamp to the heat insulator.
2.
INSTALL FUEL TANK TO FILLER PIPE HOSE
Install the hose to the fuel tank as shown in the illustration.
HINT:
Align the fuel tank side mark with the hose side mark when installing the hose.
Tighten the hose clamp until the end of the hose clamp contacts the stopper as shown in the illustration.
3.
INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
Apply a light coat of gasoline or grease to a new gasket, and install it to the fuel tank.
Install the fuel suction with pump and gauge tube into the fuel tank.
NOTICE:
Be careful not to bend the arm of the fuel sender gauge.
HINT:
Align the protrusion of the fuel suction with pump and gauge tube with the groove of the fuel tank.
Put the retainer on the fuel tank. While holding the fuel suction with pump and gauge tube, tighten the retainer one complete turn by hand.
Set SST on the retainer.
SST
09808-14030
HINT:
Hold the fuel suction tube assembly upright by hand to ensure that the fuel suction tube gasket is not moved out of position.
Securely attach the claws of SST to the protrusions of the retainer and fix SST in place.
Install SST while pressing the claws of SST against the retainer (toward the center of SST).
Using SST, tighten the retainer until the mark on the retainer is within range A on the fuel tank as shown in the illustration.
SST
09808-14030
HINT:
Fit the tips of SST onto the ribs of the retainer.
4.
INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY AND FUEL TANK RETURN TUBE SUB-ASSEMBLY (for Single Tank Type)
Install the 2 fuel tank tubes and No. 1 fuel tube joint with the 3 tube joint clips.
NOTICE:
Check that there are no scratches or foreign objects on the connecting parts.
Check that the fuel tube joints are inserted securely.
Check that the tube joint clips are on the collars of the fuel tube joints.
After installing the tube joint clips, check that the fuel tube joints cannot be pulled off.
Install the 2 fuel tank tubes to the fuel tank.
5.
INSTALL FUEL TANK MAIN TUBE, FUEL TANK RETURN TUBE AND NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)
Install the 3 fuel tank tubes with the 3 tube joint clips.
NOTICE:
Check that there are no scratches or foreign objects on the connecting parts.
Check that the fuel tube joints are inserted securely.
Check that the tube joint clips are on the collars of the fuel tube joints.
After installing the tube joint clips, check that the fuel tube joints cannot be pulled off.
Install the 3 fuel tank tubes to the fuel tank.
6.
INSTALL FUEL TANK SUB-ASSEMBLY
Set the fuel tank on a transmission jack and raise the fuel tank.
NOTICE:
Do not allow the fuel tank to contact the vehicle, especially the differential.
Raise the transmission jack.
Install the 2 fuel tank bands with the 2 pins and 2 clips.
Connect the 2 fuel tank bands with the 2 bolts.
Torque:
40 N*m{
408 kgf*cm
, 30 ft.*lbf
}
7.
CONNECT FUEL TANK TO FILLER PIPE HOSE (for Single Tank Type)
Connect the hose to the filler pipe as shown in the illustration.
HINT:
Install the hose so that the distance between the fuel tank inlet pipe side mark and fuel tank to filler pipe hose side mark is 0 to 0.3 mm (0 to 0.0118 in.) as shown in the illustration.
Tighten the hose clamp until the end of the hose clamp contacts the stopper as shown in the illustration.
8.
CONNECT FUEL TANK TO FILLER PIPE HOSE (for Double Tank Type)
Connect the hose to the filler pipe as shown in the illustration.
HINT:
Install the hose so that the distance between the fuel tank inlet pipe side mark and fuel tank to filler pipe hose side mark is 0 to 0.3 mm (0 to 0.0118 in.) as shown in the illustration.
Tighten the hose clamp until the end of the hose clamp contacts the stopper as shown in the illustration.
9.
CONNECT FUEL TANK BREATHER TUBE (for Single Tank Type)
Connect the fuel tank breather tube to the filler pipe and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
10.
CONNECT FUEL TANK BREATHER TUBE (for Double Tank Type)
Connect the fuel tank breather tube to the filler pipe and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
11.
CONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)
Connect the fuel main tube and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
12.
CONNECT NO. 2 FUEL TANK BREATHER TUBE (for Double Tank Type)
Connect the fuel tank breather tube and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
13.
CONNECT FUEL TANK RETURN TUBE (for Single Tank Type)
Connect the fuel tank return tube and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
14.
CONNECT FUEL TANK RETURN TUBE (for Double Tank Type)
Connect the fuel tank return tube and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
15.
CONNECT NO. 2 FUEL TANK BREATHER TUBE (for Single Tank Type)
Connect the fuel tank breather tube and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
16.
CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Single Tank Type)
Connect the fuel tank main tube and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
17.
CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)
Connect the fuel tank main tube and push the retainer.
HINT:
Push the parts together firmly until a "click" sound is heard.
NOTICE:
Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.
After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.
Attach the fuel tube clamp.
18.
INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY
Install the tank protector with the 5 bolts.
Torque:
20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
19.
INSTALL FUEL TANK CAP ASSEMBLY
20.
INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER
Connect the fuel pump and fuel sender gauge connector.
Install the service hole cover with new butyl tape.
w/ Rear Air Conditioning System: Install the air duct and 2 screws.
21.
INSTALL FRONT FLOOR CARPET ASSEMBLY
22.
INSTALL REAR AIR DUCT GUIDE (w/ Rear Air Conditioning System)
Attach the claw to install the guide.
Install the screw.
HINT:
Use the same procedures for both sides.
23.
INSTALL AIR DUCT PLUG (w/ Rear Air Conditioning System)
Attach the 2 claws to install the plug.
HINT:
Use the same procedures for both sides.
24.
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
w/ Sliding Roof: Install the front quarter trim panel assembly LH (Click here).
w/o Sliding Roof: Install the front quarter trim panel assembly LH (Click here).
25.
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
w/ Sliding Roof: Install the front quarter trim panel assembly RH (Click here).
w/o Sliding Roof: Install the front quarter trim panel assembly RH (Click here).
26.
INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure to install the rear seat cover cap on the other side.
Attach the 3 claws to install the rear seat cover cap.
27.
INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
Attach the 6 clips to install the support plate.
28.
INSTALL REAR DOOR SCUFF PLATE LH
Attach the 3 claws and 4 clips to install the scuff plate.
Install the screw.
29.
INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.
30.
INSTALL REAR STEP COVER
HINT:
Use the same procedure to install the step cover on the other side.
Attach the 2 claws to install the step cover.
31.
INSTALL REAR NO. 2 SEAT PROTECTOR
Attach the 10 claws to install the 2 seat protectors.
32.
INSTALL REAR NO. 1 SEAT PROTECTOR
Attach the 10 claws to install the 2 seat protectors.
33.
INSTALL REAR NO. 2 SEAT ASSEMBLY
for Face to Face Seat Type: Install the rear No. 2 seat assembly (Click here).
except Face to Face Seat Type: Install the rear No. 2 seat assembly (Click here).