Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › SFI SYSTEM › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254983 SFI SYSTEM J

1UR-FE ENGINE CONTROL  SFI SYSTEM  Fuel Injector Circuit  


DESCRIPTION

The fuel injectors are located on the intake manifold. They inject fuel into the cylinders based on the signals from the ECM.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.INSPECT FUEL INJECTOR ASSEMBLY (POWER SOURCE)
U163282E01
0.159,0.133 0.472,0.317 0.313,0.184 10 *a 0.281,1.248 0.502,1.413 0.221,0.165 10 a1 0.79,1.248 1.006,1.413 0.216,0.165 10 a5 0.281,1.591 0.502,1.757 0.221,0.165 10 a2 0.79,1.591 1.006,1.757 0.216,0.165 10 a6 0.281,1.935 0.502,2.100 0.221,0.165 10 a3 0.79,1.935 1.006,2.100 0.216,0.165 10 a7 0.281,2.279 0.502,2.444 0.221,0.165 10 a4 0.79,2.279 1.006,2.444 0.216,0.165 10 a8

a.

Disconnect the fuel injector connector.


b.

Turn the engine switch on (IG).


c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Cylinder Tester Connection Switch Condition Specified Condition
No. 1 a5-2 - Body ground Engine switch on (IG) 11 to 14 V
No. 2 a1-2 - Body ground Engine switch on (IG) 11 to 14 V
No. 3 a6-2 - Body ground Engine switch on (IG) 11 to 14 V
No. 4 a2-2 - Body ground Engine switch on (IG) 11 to 14 V
No. 5 a7-2 - Body ground Engine switch on (IG) 11 to 14 V
No. 6 a3-2 - Body ground Engine switch on (IG) 11 to 14 V
No. 7 a8-2 - Body ground Engine switch on (IG) 11 to 14 V
No. 8 a4-2 - Body ground Engine switch on (IG) 11 to 14 V


Text in Illustration
*a Front view of wire harness connector
(to Fuel Injector Assembly)



OK

2.INSPECT FUEL INJECTOR ASSEMBLY

NG

4.INSPECT NO. 1 INTEGRATION RELAY (IG2)
2.INSPECT FUEL INJECTOR ASSEMBLY
a.

Inspect the fuel injector assembly (See page Engine / Hybrid System>1UR-FE (FUEL)>FUEL INJECTOR>INSPECTION).



OK

3.CHECK HARNESS AND CONNECTOR (FUEL INJECTOR - ECM)

NG

REPLACE FUEL INJECTOR ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (FUEL INJECTOR - ECM)
a.

Disconnect the fuel injector connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RHD
Cylinder Tester Connection Condition Specified Condition
No. 1 a5-1 - Body ground Always 10 kΩ or higher
a5-1 - C46-86 (#10) Always Below 1 Ω
No. 2 a1-1 - Body ground Always 10 kΩ or higher
a1-1 - C46-109 (#20) Always Below 1 Ω
No. 3 a6-1 - Body ground Always 10 kΩ or higher
a6-1 - C46-85 (#30) Always Below 1 Ω
No. 4 a2-1 - Body ground Always 10 kΩ or higher
a2-1 - C46-108 (#40) Always Below 1 Ω
No. 5 a7-1 - Body ground Always 10 kΩ or higher
a7-1 - C46-84 (#50) Always Below 1 Ω
No. 6 a3-1 - Body ground Always 10 kΩ or higher
a3-1 - C46-107 (#60) Always Below 1 Ω
No. 7 a8-1 - Body ground Always 10 kΩ or higher
a8-1 - C46-83 (#70) Always Below 1 Ω
No. 8 a4-1 - Body ground Always 10 kΩ or higher
a4-1 - C46-106 (#80) Always Below 1 Ω

for RHD
Cylinder Tester Connection Condition Specified Condition
No. 1 a5-1 - Body ground Always 10 kΩ or higher
a5-1 - C45-86 (#10) Always Below 1 Ω
No. 2 a1-1 - Body ground Always 10 kΩ or higher
a1-1 - C45-109 (#20) Always Below 1 Ω
No. 3 a6-1 - Body ground Always 10 kΩ or higher
a6-1 - C45-85 (#30) Always Below 1 Ω
No. 4 a2-1 - Body ground Always 10 kΩ or higher
a2-1 - C45-108 (#40) Always Below 1 Ω
No. 5 a7-1 - Body ground Always 10 kΩ or higher
a7-1 - C45-84 (#50) Always Below 1 Ω
No. 6 a3-1 - Body ground Always 10 kΩ or higher
a3-1 - C45-107 (#60) Always Below 1 Ω
No. 7 a8-1 - Body ground Always 10 kΩ or higher
a8-1 - C45-83 (#70) Always Below 1 Ω
No. 8 a4-1 - Body ground Always 10 kΩ or higher
a4-1 - C45-106 (#80) Always Below 1 Ω




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.INSPECT NO. 1 INTEGRATION RELAY (IG2)
a.

Inspect the No. 1 integration relay (IG2) (See page Engine / Hybrid System>1UR-FE (ENGINE CONTROL)>RELAY>ON-VEHICLE INSPECTION).



OK

REPAIR OR REPLACE HARNESS OR CONNECTOR (NO. 1 INTEGRATION RELAY - FUEL INJECTOR)

NG

REPLACE NO. 1 INTEGRATION RELAY