52119A
1.REMOVE FRONT BUMPER COVER (for Standard)
52119A
2.REMOVE FRONT BUMPER COVER (w/ Winch)
51405C
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
4.DRAIN ENGINE COOLANT
32917
5.REMOVE TRANSMISSION OIL COOLER AIR DUCT (w/ Air Cooled Transmission Oil Cooler)
Remove the 4 bolts and oil cooler air duct.
53293C
6.REMOVE RADIATOR SIDE DEFLECTOR RH (w/o Air Cooled Transmission Oil Cooler)
Using a clip remover, remove the 4 clips and move the side deflector so that the radiator can be removed in a later step.
53294C
7.REMOVE RADIATOR SIDE DEFLECTOR LH
Using a clip remover, remove the 4 clips and move the side deflector so that the radiator can be removed in a later step.
11209
8.REMOVE V-BANK COVER SUB-ASSEMBLY
9.REMOVE AIR CLEANER CAP AND HOSE
16571C
10.REMOVE NO. 1 RADIATOR HOSE
Remove the No. 1 radiator hose.
16711
11.REMOVE FAN SHROUD
Loosen the 4 nuts holding the fluid coupling fan.
Remove the fan and generator V-belt (See page Engine / Hybrid System>1UR-FE (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL).
Disconnect the reservoir hose from the upper radiator tank.
w/ Air Cooled Transmission Oil Cooler:
Detach the claw to open the flexible hose clamp.
Remove the 2 bolts and disconnect the oil cooler tube from the fan shroud.
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the fluid coupling fan.
Be careful not to damage the radiator core.
Remove the fan pulley from the engine water pump.
16572D
12.REMOVE NO. 2 RADIATOR HOSE
Remove the No. 2 radiator hose.
16400
13.REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator.