Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL PUMP › from 2015.08
RM2660E _51 Engine / Hybrid System _052798 1GR-FE LUBRICATION _0255216 OIL PUMP A

1GR-FE LUBRICATION  OIL PUMP  REMOVAL  


PROCEDURE

Hide 17361 2.REMOVE AIR TUBE (w/ Secondary Air Injection System)

Hide 25701B 3.REMOVE NO. 1 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

Hide 25702B 4.REMOVE NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

Hide 11452 6.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.
A270151

Remove the engine oil level dipstick.


b.

Remove the bolt and engine oil level dipstick guide.


c.

Remove the O-ring from the engine oil level dipstick guide.


Hide 16206 8.REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A223013

Disconnect the 2 hoses.


b.

Remove the 3 bolts and water by-pass pipe.


Hide 16603 9.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY

a.
A158544

Remove the bolt and No. 1 idler pulley.


Hide 16604 10.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

Hide 16620 11.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

a.
A222180

Remove the 5 bolts and V-ribbed belt tensioner.


Hide 15671 13.REMOVE OIL FILTER BRACKET

a.
A268548

Remove the 2 nuts, bolt, oil filter bracket and gasket.


Hide 13471 14.REMOVE CRANKSHAFT PULLEY

a.
A072947E07
1.448,1.427 1.719,1.854 1.719,1.854 2.302,1.854 false 1.531,0.938 2.083,1.854 false 2.344,1.771 2.656,1.948 0.313,0.177 10 false SST

Using SST, hold the crankshaft pulley and loosen the pulley bolt. Continue to loosen the bolt until only 2 or 3 threads are screwed into the crankshaft.

SST
09213-54015  (91651-60855)
09330-00021  


b.
A072948E05
1.365,1.01 1.01,0.396 1.01,0.396 0.844,0.396 false 0.448,0.313 0.781,0.531 0.333,0.219 10 false SST

Using the pulley set bolt and SST, remove the crankshaft pulley and pulley bolt.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05031)


Hide 15771 15.REMOVE NO. 1 OIL PIPE

a.
A223691

Remove the 2 oil pipe unions, oil control valve filter LH, 3 gaskets and No. 1 oil pipe.

NOTICE:

Do not touch the mesh when removing the oil control valve filter.



Hide 15772 16.REMOVE NO. 2 OIL PIPE

a.
A223692

Remove the 2 oil pipe unions, oil control valve filter RH, 3 gaskets and No. 2 oil pipe.

NOTICE:

Do not touch the mesh when removing the oil control valve filter.



Hide 17.DISCONNECT FUEL PIPE SUB-ASSEMBLY

a.

Remove the 2 bolts and disconnect the fuel pipe.


Hide 11202 18.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY LH

a.
A223666

Remove the 12 bolts, seal washer, cylinder head cover and gasket.

HINT:

Make sure the removed parts are returned to the same places they were removed from.



b.
A223665

Remove the 3 gaskets.


Hide 11201 19.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

a.
A223669

Remove the 12 bolts, seal washer, cylinder head cover and gasket.

HINT:

Make sure the removed parts are returned to the same places they were removed from.



b.
A223668

Remove the 3 gaskets.


Hide 12102A 20.REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

a.
A174340

Remove the 10 bolts and 2 nuts.

HINT:

Make sure the removed parts are returned to the same places they were removed from.



b.
A174341E02
0.496,1.753 0.681,1.940 0.185,0.187 10 *1 0.834,1.041 0.616,1.213 0.616,1.213 0.616,1.734 false

Insert the blade of an oil pan seal cutter between the oil pans. Cut through the applied sealer and remove the No. 2 oil pan.

Text in Illustration
*1 Oil Pan Seal Cutter

NOTICE:

Be careful not to damage the contact surfaces of the oil pans.



Hide 15104 21.REMOVE OIL STRAINER SUB-ASSEMBLY

a.
A239204

Remove the 2 nuts and oil strainer.


Hide 12101 22.REMOVE OIL PAN SUB-ASSEMBLY

a.
A222173

Remove the 17 bolts and 2 nuts.

HINT:

Make sure the removed parts are returned to the same places they were removed from.



b.
A221168E05
2.297,1.331 2.495,1.508 0.198,0.177 10 *c 0.245,1.502 0.443,1.679 0.198,0.177 10 *a 0.245,2.894 0.443,3.071 0.198,0.177 10 *b

Using a screwdriver, remove the oil pan by prying between the oil pan and cylinder block as shown in the illustration.

Text in Illustration
*a LH Side
*b RH Side
*c Pry

NOTICE:

Be careful not to damage the contact surfaces of the cylinder block and oil pan.


HINT:

Tape the screwdriver tip before use.



c.
A222122

Remove the 3 O-rings from the timing chain cover.


Hide 11302 23.REMOVE TIMING CHAIN COVER SUB-ASSEMBLY

a.
A221169

Remove the 26 bolts and 2 nuts.


b.
A221170

Remove the timing chain cover by prying between the timing chain cover and cylinder head or cylinder block with a screwdriver.

NOTICE:

Be careful not to damage the contact surfaces of the timing chain cover, cylinder block and cylinder head.


HINT:

Tape the screwdriver tip before use.



c.
A221404

Remove the oil pump gasket from the cylinder block.


Hide 11301C 24.REMOVE FRONT CRANKSHAFT OIL SEAL

a.

Using a screwdriver and wooden block, pry out the oil seal.

NOTICE:

Do not damage the surface of the oil seal press fit hole.


HINT:

Tape the screwdriver tip before use.