Home › Engine / Hybrid System › 1GR-FE (COOLING) › WATER PUMP
RM2660E _51 Engine / Hybrid System _052792 1GR-FE COOLING _0255184 WATER PUMP A

1GR-FE COOLING  WATER PUMP  REMOVAL  


PROCEDURE

Hide 53806 3.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 4.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 5.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 16571C 8.REMOVE NO. 1 RADIATOR HOSE

Hide 16572D 9.REMOVE NO. 2 RADIATOR HOSE

Hide 32907A 10.DISCONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)

Hide 12.DISCONNECT AIR TUBE ASSEMBLY (w/ Secondary Air Injection System)

a.
A223014

Remove the 2 bolts and disconnect the air tube.


Hide 16323 13.REMOVE WATER INLET HOUSING

a.

Disconnect the throttle body connector.


b.
A273503

Disconnect the 5 water by-pass hoses.


c.

Disconnect the oil cooler hose.


d.

Disconnect the No. 2 oil cooler hose.


e.
A223012

Remove the 5 bolts and water inlet.


f.

Remove the O-ring from the water outlet pipe.


g.

Remove the gasket from the water pump.


Hide 16604 14.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.
A223006

Remove the 2 bolts and 2 No. 2 idler pulleys.


Hide 44310 15.DISCONNECT VANE PUMP ASSEMBLY

a.
A270981

Disconnect the connector.


b.

Detach the wire harness clamp.


c.
A223015

Remove the 2 bolts and disconnect the vane pump.


Hide 16620 16.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

Hide 16100 17.REMOVE ENGINE WATER PUMP ASSEMBLY

a.
A223007

Remove the 17 bolts, engine water pump and gasket.