Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL COOLER › 2014.08–2015.08
RM2660E _52 Drivetrain _052806 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0255284 OIL COOLER A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL COOLER  INSTALLATION  


PROCEDURE

Hide 32910 1.INSTALL OIL COOLER ASSEMBLY

U164649E02
2.521,2.354 3.115,2.635 0.594,0.281 10 true Outward 0.344,1.052 1.042,1.333 0.698,0.281 10 true Lower Side 0.385,2.823 1.125,3.135 0.74,0.313 10 true Lower Side

a.

Connect the oil cooler inlet hose and outlet hose.


b.

Install the rear transmission oil cooler air duct with the 4 bolts, and then install the air cooled oil cooler tube to the transmission oil cooler air duct with the bolt.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


c.
U164621E02
1.75,0.333 2.344,0.198 false 2.417,0.104 2.813,0.292 0.396,0.188 10 false Claw 0.708,0.792 0.823,0.948 0.115,0.156 10 false 3 2.313,3.063 2.427,3.219 0.115,0.156 10 false 4 0.677,3.073 0.792,3.229 0.115,0.156 10 false 2 1.708,0.885 1.823,1.042 0.115,0.156 10 false 1

Temporarily put the oil cooler on the radiator support.

NOTICE:

Securely attach the 2 claws of the oil cooler into the holes of the radiator support.



d.

Install the 4 bolts in the sequence shown in the illustration.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 32917 2.INSTALL TRANSMISSION OIL COOLER AIR DUCT

a.

Install the oil cooler air duct with the 4 bolts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


Hide 32907A 3.INSTALL OIL COOLER TUBE SUB-ASSEMBLY

U165189E02
2.531,0.635 2.615,0.854 0.083,0.219 2.365,0.698 2.5,0.854 0.135,0.156 10 false A 0.729,1.698 0.865,1.854 0.135,0.156 10 false B

a.

Temporarily install the oil cooler tube to the fan shroud with bolt A. Install bolt B and tighten it to the specified torque. Then tighten bolt A to the specified torque.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 32941H 4.CONNECT INLET NO. 4 OIL COOLER HOSE

C172435E02
2.479,0.417 2.375,0.135 false 2.719,0.313 2.375,0.135 2.375,0.135 1.927,0.135 false 1.24,0.052 1.99,0.25 0.75,0.198 10 false Paint Mark

a.

Connect the inlet oil cooler hose as shown in the illustration.

NOTICE:

Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.



Hide 32941G 5.CONNECT INLET NO. 2 OIL COOLER HOSE AND INLET NO. 3 OIL COOLER HOSE

C248671

a.

Connect the 2 transmission oil cooler hoses as shown in the illustration.

NOTICE:

Make sure the pinching portion of each clip is facing the direction shown in the illustration.



Hide 32941 6.CONNECT INLET NO. 1 OIL COOLER HOSE AND OUTLET NO. 1 OIL COOLER HOSE

C167875E02
2.792,2.531 2.385,1.698 2.385,1.698 2.51,1.698 false 2.865,2.448 2.385,1.698 false 0.635,0.771 1.333,0.781 1.333,0.781 1.344,0.781 false 3.198,0.51 2.729,0.135 2.729,0.135 2.406,0.135 false 2.75,0.458 2.729,0.115 false 2.542,1.604 3.271,1.844 0.729,0.24 10 true Paint Mark 1.354,0.688 2.083,0.927 0.729,0.24 10 true Paint Mark 1.708,0.052 2.438,0.271 0.729,0.219 10 true Paint Mark

a.

Connect the 2 oil cooler hoses as shown in the illustration.

NOTICE:

Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.



b.

Pass the hose through the flexible hose clamp and close the clamp shown in the illustration.


Hide 32943B 7.CONNECT TRANSMISSION OIL COOLER HOSE

U165190E02
0.74,2.198 1.708,2.875 1.708,2.875 1.708,3.052 false 1.333,3.063 2.042,3.25 0.708,0.188 10 false Paint Mark 0.271,2.396 0.531,2.583 0.26,0.188 10 false 45° 0.26,2.719 0.521,2.906 0.26,0.188 10 false 45° 0.396,3.01 0.969,3.198 0.573,0.188 10 false RH Side

a.

Connect the 2 transmission oil cooler hoses as shown in the illustration.

NOTICE:

Make sure the pinching portion of each clip is facing the direction shown in the illustration.



Hide 8.ADD AUTOMATIC TRANSMISSION FLUID

Hide 53784 10.INSTALL FRONT FENDER APRON TRIM PACKING C

Hide 53782 11.INSTALL FRONT FENDER APRON TRIM PACKING A

Hide 51405A 13.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53806 14.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 15.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH