Home › Drivetrain › AE80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION FLUID › 2015.08–2020.06
RM2660E _52 Drivetrain _052807 AE80F AUTOMATIC TRANSMISSION / TRANSAXLE _0255292 AUTOMATIC TRANSMISSION FLUID A

AE80F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION FLUID  REPLACEMENT  


PROCEDURE

Hide 3.REMOVE TRANSMISSION CASE COVER (w/ Cover)

a.
C341789

Remove the 3 bolts and transmission case cover.


Hide 4.REPLACE AUTOMATIC TRANSMISSION FLUID

a.

Lift the vehicle. [*1]

NOTICE:

Set the vehicle on a lift so that the vehicle is kept level when it is lifted up (make sure that the tilt angle from the front to rear of the vehicle is within +/-1°).



b.
C337025

Using a 5 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transmission assembly and drain the automatic transmission fluid. [*2]


c.
C337028E01
1.283,1.887 1.449,2.062 0.166,0.175 10 *1 1.297,2.954 1.487,3.138 0.191,0.184 10 *b 1.399,2.28 1.576,2.463 0.177,0.184 10 *a 0.932,2.107 1.119,1.972 1.119,1.972 1.27,1.972 false 1.396,2.381 1.21,2.381 1.21,2.381 1.001,2.476 false 0.972,3.046 1.279,3.046 false

Using a 5 mm hexagon socket wrench, remove the transmission oil pan tube from the automatic transmission assembly and drain the automatic transmission fluid. [*3]

Text in Illustration
*1 Transmission Oil Pan Tube
*a Overflow Plug Hole
*b 5 mm Hexagon Socket Wrench


d.

Using a 5 mm hexagon socket wrench, temporarily install the transmission oil pan tube to the automatic transmission assembly. [*4]

Torque:
0.8 N*m (8 kgf*cm, 7 in.*lbf)


e.
C337024

Remove the refill plug and O-ring from the automatic transmission assembly. [*5]


f.
C341869E04
1,2.125 1.198,2.125 1.198,2.125 1.688,1.448 true 0.292,4.292 0.49,4.292 0.49,4.292 1.083,3.563 true 0.792,1.99 0.979,2.188 0.188,0.198 10 false *a 0.104,4.208 0.292,4.396 0.188,0.188 10 false *b

Add automatic transmission fluid to the refill hole until it flows out of the overflow hole. [*6]

Text in Illustration
*a Refill Hole
*b Overflow Hole

NOTICE:
·

Use Toyota Genuine ATF WS.

·

Be sure to add automatic transmission fluid slowly. If automatic transmission fluid is added quickly, the automatic transmission fluid may hit internal parts and bounce back, resulting in automatic transmission fluid coming out of the refill hole.




g.
C337027

Wait until the automatic transmission fluid flow slows and only drips come out. [*7]


h.

Using a 5 mm hexagon socket wrench, temporarily install the gasket and overflow plug to the automatic transmission assembly. [*8]

HINT:

Reuse the old gasket as the overflow plug will be removed again.



i.

Add the amount of automatic transmission fluid specified for removal and installation of the automatic transmission oil pan sub-assembly to the refill hole. [*9]

Specified Amount of Fluid:

2.7 liters (2.9 US qts, 2.4 Imp. qts)


HINT:

If the specified amount of automatic transmission fluid cannot be added, perform steps [*10] to [*16].



j.

Temporarily install the O-ring and refill plug to the automatic transmission assembly. [*10]

HINT:

Reuse the old O-ring as the refill plug will be removed again.



k.

Lower the vehicle. [*11]


l.

Depress and hold the brake pedal. [*12]


m.

Start the engine. [*13]

NOTICE:

To reduce load, make sure that all electrical systems, such as the air conditioning, lighting system, electric fan and audio system, are off.



n.

Slowly move the shift lever from P to D, and then move the shift lever to P. [*14]


o.

Allow the engine to idle for 30 seconds to warm it up. [*15]


p.

Turn the engine switch off. [*16]


q.

Repeat steps [*1] to [*16].


r.

Repeat steps [*1] to [*3].


s.

Using a 5 mm hexagon socket wrench, install the transmission oil pan tube to the automatic transmission assembly.

Torque:
0.8 N*m (8 kgf*cm, 7 in.*lbf)


t.

Repeat steps [*5] to [*11].



v.

Lower the vehicle.


w.

Operation is completed.


Hide 5.INSTALL TRANSMISSION CASE COVER (w/ Cover)

a.

Install the transmission case cover with the 3 bolts.

Torque:
13 N*m (131 kgf*cm, 9 ft.*lbf)