Home › Suspension › SUSPENSION CONTROL › STABILIZER CONTROL VALVE(w/ KDSS) › from 2015.08
RM2660E _53 Suspension _052813 SUSPENSION CONTROL _0255376 STABILIZER CONTROL VALVE(w/ KDSS) A

SUSPENSION CONTROL  STABILIZER CONTROL VALVE(w/ KDSS)  REMOVAL  


PROCEDURE

Hide 48826D 1.REMOVE STABILIZER CONTROL VALVE PROTECTOR

a.
C172095

Detach the clamp, and disconnect the connector from the protector.


b.

Remove the 3 bolts and protector.


Hide 48860D 2.OPEN STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE

a.

Using a 5 mm socket hexagon wrench or an 8 mm socket wrench, loosen the lower and upper chamber shutter valves of the stabilizer control with accumulator housing 2.0 to 3.5 turns.

C374957E01
3.583,0.333 6.75,2.5 3.167,2.167 0.76,2.135 1.01,2.135 1.01,2.135 1.49,1.604 true 1.51,1.229 1.896,0.656 1.896,0.656 2.146,0.656 true 1.521,1.854 1.823,2.073 1.823,2.073 2.073,2.073 true 4.49,1.563 4.604,1.396 4.604,1.396 4.75,1.396 true 4.052,1.688 3.844,1.833 3.844,1.833 3.844,2.083 true 5.208,2.5 5.208,0.333 false 6.177,1.563 6.292,1.396 6.292,1.396 6.438,1.396 true 5.719,1.75 5.51,1.896 5.51,1.896 5.51,2.146 true 2.156,2 2.469,2.156 0.313,0.156 10 false *1 4.802,1.333 5.115,1.49 0.313,0.156 10 false *2 3.75,2.125 4.063,2.281 0.313,0.156 10 false *3 0.479,0.531 0.792,0.688 0.313,0.156 10 false *a 3.813,0.656 4.125,0.813 0.313,0.156 10 false *b 4.865,2.031 5.177,2.188 0.313,0.156 10 false *c 2.24,0.594 2.552,0.75 0.313,0.156 10 false *d 0.583,2.052 0.896,2.208 0.313,0.156 10 false *e 6.51,2.188 6.823,2.344 0.313,0.156 10 false *c 6.5,1.333 6.813,1.49 0.313,0.156 10 false *2 5.427,2.177 5.74,2.333 0.313,0.156 10 false *3 5.49,0.604 5.802,0.76 0.313,0.156 10 false *b 3.635,0.375 3.948,0.531 0.313,0.156 10 false *A 5.271,0.365 5.583,0.521 0.313,0.156 10 false *B

Text in Illustration
*A for Type A *B for Type B
*1 Bleeder Plug *2 Shutter Valve
*3 Block - -
*a Bottom view of stabilizer control with accumulator housing *b Side view of stabilizer control with accumulator housing
*c 2.0 to 3.5 mm *d Upper Chamber Shutter Valve
*e Lower Chamber Shutter Valve - -

NOTICE:
·

When loosening a shutter valve, make sure that the end protrudes 2 to 3.5 mm (0.0787 to 0.137 in.) from the surface of the block, and do not turn the shutter valve any further.

·

Do not remove the shutter valves.




Hide 17430 3.REMOVE TAILPIPE ASSEMBLY

a.

for 1GR-FE:

Remove the tailpipe (See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).


b.

for 1UR-FE:

Remove the tailpipe (See page Engine / Hybrid System>1UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).


c.

for 3UR-FE:

Remove the tailpipe (See page Engine / Hybrid System>3UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).



Hide 17420 4.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.

for 1GR-FE:

Remove the center exhaust pipe (See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).


b.

for 1UR-FE:

Remove the center exhaust pipe (See page Engine / Hybrid System>1UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).


c.

for 3UR-FE:

Remove the center exhaust pipe (See page Engine / Hybrid System>3UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).


d.

for 1VD-FTV:

Remove the center exhaust pipe (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE(w/o DPF)>REMOVAL).


Hide 5.DISCHARGE SUSPENSION FLUID PRESSURE

C172270

a.

Connect the hose to the bleeder plug for the stabilizer control with accumulator housing and loosen the bleeder plug.

CAUTION:

Be careful as the vehicle height will rapidly decrease when the bleeder plug of the stabilizer control with accumulator housing is loosened.



b.

Discharge the suspension fluid from the stabilizer control with accumulator housing.


c.

After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.

Torque:
8.3 N*m (85 kgf*cm, 73 in.*lbf)


Hide 48890A 6.REMOVE NO. 2 FRONT STABILIZER CONTROL TUBE ASSEMBLY (for Stabilizer Control Adapter 2 Type)

a.

Using a union nut wrench, disconnect the front No. 2 stabilizer control tube from the front No. 1 stabilizer control tube and 2 control adapters.

C344457E03
1.813,3.333 1.813,4.708 true 1.625,3.396 1.625,4.406 1.625,4.406 1.813,4.406 true 3.99,3.083 2.958,3.938 2.958,3.938 2.958,4.344 false 3.667,2.438 3.667,0.76 3.667,0.76 4.135,0.76 false 3.781,2.469 3.781,0.76 true 5.031,2.688 5.583,3.333 5.583,3.333 6.135,3.333 false 1.75,4.729 1.938,4.917 0.188,0.188 10 false *1 2.885,4.354 3.073,4.542 0.188,0.188 10 false *4 4.177,0.646 4.365,0.833 0.188,0.188 10 false *2 6.156,3.24 6.344,3.427 0.188,0.188 10 false *3

Text in Illustration
*1 Front No. 1 Stabilizer Control Tube *2 Front No. 2 Stabilizer Control Tube
*3 Stabilizer Control Adapter for Upper Chamber Side *4 Stabilizer Control Adapter for Lower Chamber Side


b.

Remove the bolt and front No. 2 stabilizer control tube from the vehicle.


Hide 48890A 7.REMOVE FRONT STABILIZER CONTROL TUBE ASSEMBLY NO.2 (for Stabilizer Control Adapter 1 Type)

a.

Using a union nut wrench, disconnect the front No. 2 stabilizer control tube from the front No. 1 stabilizer control tube, stabilizer control adapter for lower chamber side and stabilizer control with accumulator housing assembly.

C374961E01
1,2.833 1.417,2.833 1.417,2.833 1.417,3.5 true 1.25,3.167 1.25,2.833 true 2.833,2.25 3.25,2.25 3.25,2.25 3.25,2.583 true 3.083,2.583 3.083,2.25 true 3.385,3.458 3.552,3.458 3.552,3.458 3.635,3.125 true 6.281,0.688 6.448,0.688 6.448,0.688 6.646,1.344 true 0.698,2.813 1.01,3.01 0.313,0.198 10 false *1 2.667,2.219 2.979,2.417 0.313,0.198 10 false *2 3.188,3.396 3.5,3.594 0.313,0.198 10 false *3 6.094,0.635 6.406,0.833 0.313,0.198 10 false *4

Text in Illustration
*1 Front No. 1 Stabilizer Control Tube *2 Front No. 2 Stabilizer Control Tube
*3 Stabilizer Control Adapter for Lower Chamber Side *4 Stabilizer Control with Accumulator Housing Assembly


b.

Remove the bolt and front No. 2 stabilizer control tube from the vehicle.


Hide 48880 8.REMOVE NO. 1 REAR STABILIZER CONTROL TUBE ASSEMBLY (for Stabilizer Control Adapter 2 Type)

a.

Using a union nut wrench, disconnect the rear No. 1 stabilizer control tube from the 2 control adapters and stabilizer control with accumulator housing.

C344458E03
4.583,2.875 4.583,2.333 4.583,2.333 2.802,2.333 true 4.448,2.708 4.448,2.333 false 6.615,1.49 6.615,0.615 6.615,0.615 6.083,0.615 false 4.094,3.302 3.969,3.406 3.969,3.406 3.969,3.563 false 2.99,3.344 1.802,3.344 1.802,3.344 1.802,3.927 false 2.635,2.271 2.844,2.458 0.208,0.188 10 false *1 5.917,0.542 6.125,0.729 0.208,0.188 10 false *2 3.906,3.563 4.115,3.75 0.208,0.188 10 false *3 1.74,3.927 1.948,4.115 0.208,0.188 10 false *4

Text in Illustration
*1 Rear No. 1 Stabilizer Control Tube *2 Stabilizer Control with Accumulator Housing Assembly
*3 Stabilizer Control Adapter for Upper Chamber Side *4 Stabilizer Control Adapter for Lower Chamber Side


b.

Remove the bolt and rear No. 1 stabilizer control tube from the vehicle.


Hide 48880A 9.DISCONNECT NO. 2 REAR STABILIZER CONTROL TUBE ASSEMBLY

C175003

a.

Using a union nut wrench, disconnect the rear No. 2 stabilizer control tube from the stabilizer control with accumulator housing.


Hide 48860A 10.REMOVE STABILIZER CONTROL WITH ACCUMULATOR HOUSING ASSEMBLY

a.

Remove the cap and bleeder plug from the accumulator housing.


b.
C172273

Remove the 2 bolts and stabilizer control with accumulator housing.


Hide 48801 11.REMOVE STABILIZER CONTROL ADAPTER SUB-ASSEMBLY

a.

Remove the 2 bolts and 2 stabilizer control adapters from the vehicle.

C174276E05
3.573,0.427 6.135,2.271 2.563,1.844 2.615,1.448 1.292,1.448 false 4.458,1.802 5.781,1.802 false 1.042,1.344 1.24,1.531 0.198,0.188 10 false *2 5.854,1.74 6.052,1.927 0.198,0.188 10 false *1 3.635,0.469 3.833,0.656 0.198,0.188 10 false *A

Text in Illustration
*A for Stabilizer Control Adapter 2 Type - -
*1 Stabilizer Control Adapter for Upper Chamber Side *2 Stabilizer Control Adapter for Lower Chamber Side