Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255494 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B15F6  Main Body ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (cowl side junction block LH) cannot be customized via the navigation system vehicle customization screen.

HINT:
The main body ECU (cowl side junction block LH) controls the items for the following systems that are customizable via the multi-display screen:
·

Power door lock control system

·

Wireless door lock control system

·

Lighting system



DTC Code DTC Detection Condition Trouble Area
B15F6 Main body ECU (cowl side junction block LH) vehicle setting processing error.
·

CAN communication system

·

Power door lock control system

·

Wireless door lock control system

·

Lighting system

·

Main body ECU (cowl side junction block LH)

·

Multi-media module receiver assembly



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the intelligent tester to check if the CAN communication system is functioning normally.


Result
Result Proceed to
No DTCs are output A
DTCs are output (for LHD) B
DTCs are output (for RHD) C



A

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

B

C

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check if the power door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the power door lock control system.


OK:

No malfunctions are present in the power door lock control system.




OK

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

NG

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check if the wireless door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system.


OK:

No malfunctions are present in the wireless door lock control system.




OK

4.CHECK LIGHTING SYSTEM

NG

4.CHECK LIGHTING SYSTEM
a.

Check if the lighting system is malfunctioning (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the lighting system.


OK:

No malfunctions are present in the lighting system.




OK

5.CHECK CUSTOMIZE ITEMS

NG

5.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Customization" screen.


b.

Make a note of the customizable items for each main body ECU (cowl side junction block LH) related system.

HINT:

These items shown as customizable via the navigation system vehicle customization screen can also be changed using the intelligent tester. In a following step, the intelligent tester will be used.


i.

To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the power door lock control system related items that can be customized via the multi-display screen (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS).


ii.

To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the wireless door lock control system related items that can be customized via the multi-display screen (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>CUSTOMIZE PARAMETERS).


iii.

To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the lighting system related items that can be customized via the multi-display screen (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS).



c.

Using the intelligent tester, confirm that it is possible to change the settings of the customize parameters that are available for customization via the multi-display screen.

OK:

The items available for customization via the multi-display screen can be customized successfully using the intelligent tester.




OK

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

NG

REPLACE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)