Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) › from 2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255548 WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)  TERMINALS OF ECU  


CHECK MAIN BODY ECU


U166485E02
1.146,2.521 1.552,2.281 false 1.625,2.542 2.063,2.813 false 3.219,0.99 3.635,0.75 false 1.448,1.135 1.729,1.333 0.281,0.198 10 false 2K 1.448,1.74 1.729,1.938 0.281,0.198 10 false 2H 0.927,2.458 1.208,2.656 0.281,0.198 10 false 2G 2.104,2.74 2.385,2.938 0.281,0.198 10 false 2F 3.115,0.906 3.396,1.104 0.281,0.198 10 false A 5.479,1.01 5.76,1.208 0.281,0.198 10 false 2J 5.49,1.677 5.771,1.875 0.281,0.198 10 false 2I 1.5,3.156 1.781,3.354 0.281,0.198 10 false 2K 4.531,3.146 4.813,3.344 0.281,0.198 10 false 2J 6.438,3.146 6.719,3.344 0.281,0.198 10 false 2F 1.271,5.052 1.552,5.25 0.281,0.198 10 false 2H 3.021,5.073 3.302,5.271 0.281,0.198 10 false 2G 5.313,5.042 5.594,5.24 0.281,0.198 10 false 2I 3.646,6.656 3.927,6.854 0.281,0.198 10 false A 0.167,0.042 0.448,0.24 0.281,0.198 12 false *1

Text in Illustration
*1 Cowl Side Junction Block LH - -

U157885E03
4.781,1.76 4.542,2.073 false 6.052,1.75 5.813,2.063 false 5.458,1.76 5.219,2.073 false 1.844,2.781 2.427,3.083 0.583,0.302 10 false A 1.99,3.865 2.573,4.167 0.583,0.302 10 false E117 3.604,3.875 4.188,4.177 0.583,0.302 10 false E118 5,3.875 5.583,4.177 0.583,0.302 10 false E137 5.51,1.625 6.094,1.927 0.583,0.302 10 false E118 6.115,1.604 6.698,1.906 0.583,0.302 10 false E137 4.823,1.615 5.406,1.917 0.583,0.302 10 false E117 0.104,0 0.688,0.302 0.583,0.302 12 false *1

Text in Illustration
*1 Main Body ECU - -


b.

Connect the cowl side junction block LH connectors.


c.

Measure the resistance and voltage according to value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω
A-30 (ACC) - Body ground None - Body ground ACC power supply Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V
2A-1 (ACC) - 2D-62 (GND2) None - Body ground Battery power supply Always 11 to 14 V
A-32 (IG) - Body ground None - Body ground IG power supply Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V



e.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2H-29 (BZR) - Body ground G - Body ground Wireless door lock buzzer signal Wireless door lock buzzer off Below 1 V
Wireless door lock buzzer on Pulse generation
2I-9 (ACTD) - Body ground LA-L - Body ground Door lock motor unlock drive output signal (driver door) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V
2J-3 (ACT-) - Body ground LA-L - Body ground Door lock motor unlock drive output signal (front passenger side door and rear door RH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V
2J-4 (ACT-) - Body ground LA-V - Body ground Door lock motor unlock drive output signal (rear door RH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V
2J-5 (ACT+) - Body ground LA-B - Body ground*3
LA-R - Body ground*4
Door lock motor lock drive output signal (front passenger side door) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V
2J-6 (ACT+) - Body ground LA-R - Body ground Door lock motor lock drive output signal (driver door) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V
2J-7 (ACT+) - Body ground LA-GR - Body ground Door lock motor lock drive output signal (rear door RH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V
2J-16 (LSFR) - Body ground B - Body ground Front door RH unlock detection switch input signal Front door RH unlocked Below 1 V
Engine switch off, all doors closed and front door RH locked Pulse generation
2J-19 (LSFL) - Body ground G - Body ground Front door LH unlock detection switch input signal Front door LH unlocked Below 1 V
Engine switch off, all doors closed and front door LH locked Pulse generation
2J-21 (UL1) - Body ground LG - Body ground Door control switch assembly input Door control switch assembly off Pulse generation
Door control switch assembly on (unlock) Below 1 V
2J-21 (UL1) - Body ground*1 LG - Body ground Master switch (door control switch) input Master switch (door control switch) off Pulse generation
Master switch (door control switch) on (unlock) Below 1 V
2J-26 (L1) - Body ground L - Body ground Door control switch assembly input Door control switch assembly off Pulse generation
Door control switch assembly on (lock) Below 1 V
2J-26 (L1) - Body ground*1 L - Body ground Master switch (door control switch) input Master switch (door control switch) off Pulse generation
Master switch (door control switch) on (lock) Below 1 V
2J-29 (RCTY) - Body ground BE - Body ground Rear door courtesy light switch assembly RH input signal Rear door RH open Below 1 V
Rear door RH closed Pulse generation
2K-7 (ACT+) - Body ground LA-SB - Body ground*5
SB - Body ground*6
Door lock motor lock drive output signal (rear door LH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V
2K-8 (TR+) - Body ground*7 G - Body ground Back door lock motor drive output Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V
2K-9 (ACT-) - Body ground LA-P - Body ground*5
P - Body ground*6
Door lock motor unlock drive output signal (rear door LH and back door*6) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V
Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V
2K-31 (BCTY) - Body ground*5, *7 W - Body ground Back door courtesy light switch input Back door closed Below 1 V
Back door open Pulse generation
2K-33 (LSWL) - Body ground L - Body ground Rear door LH unlock detection switch input signal Rear door LH unlocked Below 1 V
Engine switch off, all doors closed and rear door LH locked Pulse generation
2K-34 (LCTY) - Body ground BE - Body ground Rear door courtesy light switch assembly LH input signal Rear door LH open Below 1 V
Rear door LH closed Pulse generation
E117-2 (LSWR) - Body ground W - Body ground Rear door RH unlock detection switch input signal Rear door RH unlocked Below 1 V
Engine switch off, all doors closed and rear door RH locked 11 to 14 V
E117-3 (ACTG) - Body ground*5 B - Body ground Collision door lock release signal Collision door lock release function does not operate Below 2 V*8
7.3 to 9.9 V*9
Collision door lock release function operates Below 1 V
E118-2 (UL3) - Body ground P - Body ground Driver door key-linked unlock input Driver door key cylinder turned to neutral position Pulse generation
Driver door key cylinder turned to on (unlock) Below 1 V
E118-6 (FLCY) - Body ground V - Body ground Front door courtesy light switch assembly LH input signal Front door LH open Below 1 V
Front door LH closed Pulse generation
E118-17 (LSWB) - Body ground*6 B - Body ground Back door unlock detection switch input signal Back door unlocked Below 1 V
Engine switch off, all doors closed and back door locked 11 to 14 V
E118-27 (FRCY) - Body ground V - Body ground Front door courtesy light switch assembly RH input signal Front door RH open Below 1 V
Front door RH closed Pulse generation
E118-29 (L2) - Body ground G - Body ground Driver door key-linked unlock input Driver door key cylinder turned to neutral position Pulse generation
Driver door key cylinder turned to on (lock) Below 1 V

*1: for LHD

*2: for RHD

*3: w/ Panic Switch

*4: for GRJ200L-GNANKC, URJ202L-GNTEKC


If the result is not as specified, the ECU may have a malfunction.



CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


U164304E02
1.74,0.417 2.208,0.583 0.469,0.167 10 false E128 3.365,0.417 3.833,0.583 0.469,0.167 10 false E129 5.104,0.417 5.573,0.583 0.469,0.167 10 false E130

a.

Disconnect the E129 and E130 certification ECU (smart key ECU assembly) connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E130-10 (+B) - Body ground P - Body ground Battery power supply Always 11 to 14 V
E130-11 (E) - Body ground BR - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



c.

Reconnect the E129 and E130 certification ECU (smart key ECU assembly) connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E129-18 (RCO) - E130-11 (E) B - BR Output to door control receiver (Power supply for door control receiver.
Certification ECU (smart key ECU assembly) outputs 5 V when receiver starts operating.)
Procedure:
1.

Engine switch off

2.

Electrical key transmitter subassembly brought outside vehicle

3.

Electrical key transmitter subassembly brought outside detection area*1 but kept inside wireless function operational area*2

4.

Lock or unlock button of electrical key transmitter subassembly not pressed → pressed


Pulse generation (See waveform 1)
E129-20 (RDAM) - E130- 11 (E) LG - BR Door control receiver verifies data received from electrical key transmitter sub-assembly. Door control receiver sends data to ECU and intermittently grounds 12 V signal from certification ECU (smart key ECU assembly).
Proceed:
1.

Engine switch off

2.

All doors locked

3.

Electrical key transmitter subassembly brought outside detection area*1 but kept inside wireless function operational area*2

4.

Lock or unlock button of electrical key transmitter subassembly not pressed → pressed


Pulse generation (See waveform 2)
E130-19 (CSEL) - E130-11 (E) L - BR Communication channel switching circuit
Procedure:
1.

Engine switch off

2.

All doors closed


Below 1 V → 4.5 to 6 V → Below 1 V

If the result is not as specified, the ECU may have a malfunction.



e.
B251178E05
0.198,1 0.531,1.198 0.333,0.198 10 false GND 0.969,1.885 1.156,2.042 0.188,0.156 10 false *a 2.01,1.885 2.198,2.042 0.188,0.156 10 false *b

Using an oscilloscope, check waveform 1.

HINT:

The oscilloscope waveform shown in the illustration is an example for reference only. Noise, chattering, etc. are not shown.


Text in Illustration
*a Before lock or unlock button of electrical key transmitter sub-assembly pressed
*b After lock or unlock button of electrical key transmitter sub-assembly pressed

Waveform 1 (Reference)
Item Content
Tester Connection E129-18 (RCO) - E130-11 (E)
Tool Setting 2 V/DIV., 500 ms/DIV.
Condition
Procedure:
1.

Engine switch off

2.

Electrical key transmitter subassembly brought outside detection area but kept inside wireless function operational area

3.

Lock or unlock switch of electrical key transmitter subassembly not pressed → pressed




f.
B251177E06
0.177,1.01 0.51,1.208 0.333,0.198 10 false GND 0.979,1.875 1.167,2.031 0.188,0.156 10 false *a 2.198,1.875 2.385,2.031 0.188,0.156 10 false *b

Using an oscilloscope, check waveform 2.

HINT:

The oscilloscope waveform shown in the illustration is an example for reference only. Noise, chattering, etc. are not shown.


Text in Illustration
*a Before lock or unlock button of electrical key transmitter sub-assembly pressed
*b After lock or unlock button of electrical key transmitter sub-assembly pressed

Waveform 2 (Reference)
Item Content
Tester Connection E129-20 (RDAM) - E130-11 (E)
Tool Setting 5 V/DIV., 500 ms/DIV.
Condition
Procedure:
1.

Engine switch off

2.

All doors locked

3.

Electrical key transmitter subassembly not inside vehicle

4.

Electrical key transmitter subassembly brought outside detection area but kept inside wireless function operational area

5.

Lock or unlock switch of electrical key transmitter subassembly not pressed → pressed