When the master cylinder solenoid (skid control ECU) detects a malfunction in the VSC warning buzzer circuit, a malfunction signal is sent to the seat belt control ECU, and this DTC is stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2070 | While the ignition switch is ON, the skid control ECU buzzer circuit malfunction signal is received by the seat belt control ECU. | ·
Vehicle stability control system ·
Seat belt control ECU |
Using the intelligent tester, enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Buzzer | Skid control buzzer sounds | OFF or ON | - |
Skid control buzzer sounds.
| Result | Proceed to |
|---|---|
| OK
(for LHD) |
A |
| OK
(for RHD) |
B |
| NG | C |
A
B
C