This DTC is stored when a malfunction occurs in the steering angle sensor.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2058 | The vehicle speed is 50 km/h (31 mph) or more and a malfunction is detected in the steering angle sensor. | ·
Steering angle sensor ·
Seat belt control ECU ·
Distance control ECU |
Use the intelligent tester to check if the CAN communication system is functioning normally (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM(for LHD)>HOW TO PROCEED WITH TROUBLESHOOTING for LHD, Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM(for RHD)>HOW TO PROCEED WITH TROUBLESHOOTING for RHD).
| Result | Proceed to |
|---|---|
| OK
(DTC U0126 is not output) |
A |
| NG
(for LHD) |
B |
| NG
(for RHD) |
C |
A
B
C
Using the intelligent tester, enter the following menus: Body / Pre-Crash / Trouble Code.
Clear the DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| OK
(DTC B2058 is not output) |
A |
| NG
(for LHD) |
B |
| NG
(for RHD) |
C |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C