Home › Vehicle Interior › SEAT › REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 60 Side) › from 2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255642 REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 60 Side) A

SEAT  REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 60 Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 87510P 1.INSTALL REAR SEAT CUSHION HEATER ASSEMBLY

a.
B378974E10
0.14,1.972 0.989,2.184 0.849,0.211 10 Name Stamp 2.008,1.878 2.353,1.987 0.345,0.108 2.007,1.962 1.842,2.082 1.842,2.082 1.18,2.082 false

Set the rear seat cushion heater assembly onto the rear separate type seat cushion cover so that the name stamp is facing the rear seat cushion pad LH.


b.

Install the seat cushion heater with new tack pins.


Hide 71834G 18.INSTALL REAR NO. 1 SEAT RECLINING COVER LH

Hide 71400S 21.INSTALL REAR NO. 1 SEAT ASSEMBLY LH