Home › Vehicle Exterior › MIRROR (EXT) › POWER MIRROR CONTROL SYSTEM(w/ Retract Mirror) › 2015.08–2017.08
RM2660E _59 Vehicle Exterior _052853 MIRROR (EXT) _0255766 POWER MIRROR CONTROL SYSTEM(w/ Retract Mirror) U

MIRROR (EXT)  POWER MIRROR CONTROL SYSTEM(w/ Retract Mirror)  TERMINALS OF ECU  


CHECK OUTER MIRROR CONTROL ECU ASSEMBLY LH


U164312E02
2.521,0.188 2.969,0.396 0.448,0.208 10 false I40 4.573,0.188 5.021,0.396 0.448,0.208 10 false I41

a.

Disconnect the I41 outer mirror control ECU assembly LH connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
I41-5 (SIG) - I41-7 (GND) B - W-B ACC power supply Engine switch off Below 1 V
Engine switch on (ACC) 11 to 14 V
I41-6 (CPUB) - I41-7 (GND) G - W-B Battery (ECU power source) Always 11 to 14 V
I41-7 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
I41-14 (BDR) - I41-7 (GND) L - W-B Battery (ECU power source) Always 11 to 14 V


c.

Reconnect the I41 outer mirror control ECU assembly LH connector.


d.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
I40-3 (MR+) - Body ground R - Body ground Mirror retract motor output (retracting)
·

Engine switch on (ACC)

·

Outer rear view mirror assembly LH being retracted


11 to 14 V
·

Engine switch on (ACC)

·

Outer rear view mirror assembly LH stopped


Below 1 V
I40-11 (MR-) - Body ground BR - Body ground Mirror retract motor output (returning)
·

Engine switch on (ACC)

·

Outer rear view mirror assembly LH retuning


11 to 14 V
·

Engine switch on (ACC)

·

Outer rear view mirror assembly LH stopped


Below 1 V
I40-1 (LMVR) - Body ground R - Body ground Mirror motor output
·

Engine switch on (ACC)

·

Mirror surface stopped


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving downward or left


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving upward


11 to 14 V
I40-9 (LMHR) - Body ground G - Body ground Mirror motor output
·

Engine switch on (ACC)

·

Mirror surface stopped


Below 1 Ω
·

Engine switch on (ACC)

·

Mirror surface moving upward or right


Below 1 Ω
·

Engine switch on (ACC)

·

Mirror surface moving left


11 to 14 V
I40-10 (LM+R) - Body ground P - Body ground Mirror motor output
·

Engine switch on (ACC)

·

Outer mirror LH stopped


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving upward or left


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving downward or right


11 to 14 V
I40-5 (LVC) - I40-14 (LE1)*1 W - LG Mirror position sensor power supply Engine switch off Below 1 V
Engine switch on (IG) 4.5 to 5.5V
I40-6 (VSSR) - Body ground*1 L - Body ground Vertical direction position sensor signal
·

Engine switch on (ACC)

·

Mirror surface moving upward or downward


Voltage fluctuates between 0 to 5 V
I40-13 (HSSR) - Body ground*1 B - Body ground Horizontal direction position sensor signal
·

Engine switch on (ACC)

·

Mirror surface moving left or right


Voltage fluctuates between 0 to 5 V
I40-4 (HTR+) - I40-12 (HTR-)*2 LG - L Mirror heater drive voltage
·

Engine switch on (IG)

·

Rear window defogger switch (mirror heater switch) off


Below 1 V
·

Engine switch on (IG)

·

Rear window defogger switch (mirror heater switch) on


11 to 14 V
I41-2 (M1) - I41-7 (GND)*1, *3 G - W-B Seat memory switch M1 signal
·

Engine switch on (IG)

·

Seat memory switch M1 on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch M1 off


Below 1 V
I41-3 (M2) - I41-7 (GND)*1, *3 W - W-B Seat memory switch M2 signal
·

Engine switch on (IG)

·

Seat memory switch M2 on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch M2 off


Below 1 V
I41-4 (M3) - I41-7 (GND)*1, *3 R - W-B Seat memory switch M3 signal
·

Engine switch on (IG)

·

Seat memory switch M3 on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch M3 off


Below 1 V
I41-1 (MM) - I41-7 (GND)*1, *3 B - W-B Seat memory switch SET signal
·

Engine switch on (IG)

·

Seat memory switch SET on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch SET off


Below 1 V

·

*1: w/ Memory

·

*2: w/ Mirror Heater

·

*3: for LHD




CHECK OUTER MIRROR CONTROL ECU ASSEMBLY RH


U164313E02
2.521,0.188 2.969,0.396 0.448,0.208 10 false I37 4.583,0.188 5.031,0.396 0.448,0.208 10 false I38

a.

Disconnect the I38 outer mirror control ECU assembly RH connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
I38-5 (SIG) - I38-7 (GND) B - W-B ACC power supply Engine switch off (IG) Below 1 V
Engine switch on (IG) 11 to 14 V
I38-6 (CPUB) - I38-7 (GND) G - W-B Battery (ECU power source) Always 11 to 14 V
I38-7 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
I38-14 (BDR) - I38-7 (GND) L - W-B Battery (ECU power source) Always 11 to 14 V


c.

Reconnect the I38 outer mirror control ECU RH connector.


d.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
I37-3 (MR+) - Body ground G- Body ground Mirror retract motor output (retracting)
·

Engine switch on (ACC)

·

Outer rear view mirror assembly RH being retracted


11 to 14 V
·

Engine switch on (ACC)

·

Outer rear view mirror assembly RH stopped


Below 1 V
I37-11 (MR-) - Body ground LG - Body ground Mirror retract motor output (returning)
·

Engine switch on (ACC)

·

Outer rear view mirror assembly LH retuning


11 to 14 V
·

Engine switch on (ACC)

·

Outer rear view mirror assembly LH stopped


Below 1 V
I37-1 (RMVR) - Body ground R - Body ground Mirror motor output
·

Engine switch on (ACC)

·

Mirror surface stopped


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving downward or left


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving upward


11 to 14 V
I37-9 (RMHR) - Body ground G - Body ground Mirror motor output
·

Engine switch on (ACC)

·

Mirror surface stopped


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving upward or right


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving left


11 to 14 V
I37-10 (RM+R) - Body ground P - Body ground Mirror motor output
·

Engine switch on (ACC)

·

Mirror surface stopped


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving upward or left


Below 1 V
·

Engine switch on (ACC)

·

Mirror surface moving downward or right


11 to 14 V
I37-5 (RVC) - I37-14 (RE1)*1 B - R Mirror position sensor power supply Engine switch off Below 1 V
Engine switch on (IG) 4.5 to 5.5V
I37-6 (VSSR) - Body ground*1 SB - Body ground Vertical direction position sensor signal
·

Engine switch on (ACC)

·

Mirror surface moving upward or downward


Voltage fluctuates between 0 to 5 V
I37-13 (HSSR) - Body ground*1 L - Body ground Horizontal direction position sensor signal
·

Engine switch on (ACC)

·

Mirror surface moving left or right


Voltage fluctuates between 0 to 5 V
I37-4 (HTR+) - I37-12 (HTR-)*2 SB - L Mirror heater drive voltage
·

Engine switch on (IG)

·

Rear window defogger switch (mirror heater switch) off


Below 1 V
·

Engine switch on (IG)

·

Rear window defogger switch (mirror heater switch) on


11 to 14 V
I38-2 (M1) - I38-7(GND)*1, *3 G - W-B Seat memory switch M1 signal
·

Engine switch on (IG)

·

Seat memory switch M1 on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch M1 off


Below 1 V
I38-3 (M2) - I38-7(GND)*1, *3 W - W-B Seat memory switch M2 signal
·

Engine switch on (IG)

·

Seat memory switch M2 on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch M2 off


Below 1 V
I38-4 (M3) - I38-7(GND)*1, *3 R - W-B Seat memory switch M3 signal
·

Engine switch on (IG)

·

Seat memory switch M3 on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch M3 off


Below 1 V
I38-1 (MM) - I38-7(GND)*1, *3 B - W-B Seat memory switch SET signal
·

Engine switch on (IG)

·

Seat memory switch SET on


11 to 14 V
·

Engine switch on (IG)

·

Seat memory switch SET off


Below 1 V

·

*1: w/ Memory

·

*2: w/ Mirror Heater

·

*3: for LHD


If the result is not as specified, the ECU may have a malfunction.



CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU), COWL SIDE JUNCTION BLOCK LH


U166544E02
1.625,0.635 1.625,0.396 1.625,0.396 1.708,0.396 false 1.615,1.135 1.865,1.135 false 1.615,1.448 1.865,1.448 false 1.615,1.813 1.865,1.813 false 0.865,1.25 1.188,1.458 0.323,0.208 10 false 2K 1.885,1.052 2.479,1.292 0.594,0.24 10 false E137 1.76,0.313 2.073,0.49 0.313,0.177 10 false *1 1.885,1.365 2.5,1.604 0.615,0.24 10 false E118 1.885,1.74 2.448,2 0.563,0.26 10 false E117 0.865,1.833 1.177,2.031 0.313,0.198 10 false 2H 0.906,2.24 1.229,2.458 0.323,0.219 10 false 2G 0.938,2.448 1.25,2.635 0.313,0.188 10 false 2F 3.76,0.938 4.094,1.135 0.333,0.198 10 false A 5.854,1.104 6.198,1.333 0.344,0.229 10 false 2J 5.865,1.75 6.198,1.979 0.333,0.229 10 false 2I 1.823,4.667 1.99,4.854 0.167,0.188 10 false 2I 5.604,4.667 5.781,4.844 0.177,0.177 10 false 2J 1.25,6.167 1.448,6.323 0.198,0.156 10 false 2H 3.781,6.167 3.99,6.365 0.208,0.198 10 false 2K 5.438,6.313 5.646,6.542 0.208,0.229 10 false 2G 6.438,6.313 6.646,6.531 0.208,0.219 10 false 2F 3.531,7.771 3.698,8.042 0.167,0.271 10 false A 1.354,3.24 2,3.448 0.646,0.208 10 false E117 3.604,3.24 4.219,3.479 0.615,0.24 10 false E118 5.74,3.24 6.302,3.5 0.563,0.26 10 false E137

a.

Remove the main body ECU (multiplex network body ECU) from the cowl side junction block LH .



b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
A-32 (IG) - Body ground - IG power supply Engine switch off Below 1 V
Engine switch on (IG) 11 to 14 V
A-30 (ACC) - Body ground - ACC power supply Engine switch off Below 1 V
Engine switch on (ACC) 11 to 14 V
A-31 (BECU) - Body ground - BECU power supply Always 11 to 14 V
A-11 (GND1) - Body ground - Body ground Always Below 1 Ω


c.

Install the main body ECU (multiplex network body ECU) to the cowl side junction block LH.



d.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
E117-14 (RET) - 2J-1 (GND) BE - W-B Mirror retract motor output (retracting)
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror retract switch) on


Below 1 V
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror retract switch) off


11 to 14 V
E137-4 (MIRB) - E137-6 (MIRE) B - P Mirror surface adjust switch signal
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror surface adjust switch) right


Below 2.7 V
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror surface adjust switch) left


Below 4 V
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror surface adjust switch) down


Below 3.5 V
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror surface adjust switch) up


Below 1.7 V
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror surface adjust switch) not pushed


11 to 14 V
E137-5 (MIRS) - E137-6 (MIRE) W - P Mirror select switch signal
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror select switch) L


11 to 14 V
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror select switch) R


Below 2 V
·

Engine switch on (ACC)

·

Outer mirror switch assembly (mirror select switch) neutral


Below 1 V