Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81220
1.INSTALL FOG LIGHT ASSEMBLY LH
Attach the 2 guides to install the fog light assembly LH.
Install the 2 screws.
Connect the connector.
52149
2.INSTALL FRONT BUMPER INNER BRACKET (for RH Side)
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>REASSEMBLY)
w/ Winch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>REASSEMBLY)
52119A
3.INSTALL FRONT BUMPER COVER
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>INSTALLATION)
w/ Winch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>INSTALLATION)
4.ADJUST FOG LIGHT AIMING