Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM (w/ Entry and Start System) › from 2017.08
RM2660E _58 Vehicle Interior _052839 THEFT DETERRENT / KEYLESS ENTRY _0255571 THEFT DETERRENT SYSTEM(w/ Entry and Start System) U

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM(w/ Entry and Start System)  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND COWL SIDE JUNCTION BLOCK LH


U166541E02
1.625,0.625 1.625,0.385 1.625,0.385 1.708,0.385 false 1.615,1.125 1.865,1.125 true 1.615,1.469 1.865,1.469 true 1.615,1.802 1.865,1.802 true 0.865,1.188 1.198,1.396 0.333,0.208 10 false 2K 1.906,1.042 2.552,1.229 0.646,0.188 10 false E137 1.771,0.313 2.115,0.448 0.344,0.135 10 false *1 1.917,1.385 2.5,1.573 0.583,0.188 10 false E118 1.896,1.708 2.458,1.896 0.563,0.188 10 false E117 0.865,1.76 1.188,1.938 0.323,0.177 10 false 2H 0.906,2.198 1.26,2.396 0.354,0.198 10 false 2G 0.948,2.448 1.302,2.615 0.354,0.167 10 false 2F 3.75,0.969 4.073,1.104 0.323,0.135 10 false A 5.844,1.094 6.188,1.302 0.344,0.208 10 false 2J 5.854,1.75 6.219,1.938 0.365,0.188 10 false 2I 1.333,3.24 1.927,3.438 0.594,0.198 10 false E117 3.594,3.24 4.281,3.448 0.688,0.208 10 false E118 5.76,3.25 6.521,3.5 0.76,0.25 10 false E137 1.833,4.677 2.063,4.906 0.229,0.229 10 false 2I 5.594,4.688 5.854,4.917 0.26,0.229 10 false 2J 1.25,6.177 1.531,6.365 0.281,0.188 10 false 2H 3.781,6.188 4.031,6.396 0.25,0.208 10 false 2K 5.448,6.333 5.708,6.521 0.26,0.188 10 false 2G 6.438,6.333 6.698,6.542 0.26,0.208 10 false 2F 3.521,7.781 3.635,7.917 0.115,0.135 10 false A

Text in Illustration
*1 Main Body ECU (Multiplex Network Body ECU) - -

a.

Remove the main body ECU (multiplex network body ECU) from the cowl side junction block LH.



b.

Connect the cowl side junction block LH connectors.


c.

Measure the voltage and resistance according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω
A-30 (ACC) - Body ground None - Body ground ACC power supply Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V
A-31 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V
A-32 (IG) - Body ground None - Body ground IG power supply Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
E118-6 (FLCY) - Body ground V - Body ground Front door courtesy light switch assembly LH input signal Front door LH closed (OFF) → open (ON) 10 kΩ or higher → Below 1 Ω
E118-27 (FRCY) - Body ground V - Body ground Front door courtesy light switch assembly RH input signal Front door RH closed (OFF) → open (ON) 10 kΩ or higher → Below 1 Ω
A-13 (LCTY) - Body ground None - Body ground Rear door courtesy light switch assembly LH input signal Rear door LH closed (OFF) → open (ON) 10 kΩ or higher → Below 1 Ω
A-2 (RCTY) - Body ground None - Body ground Rear door courtesy light switch assembly RH input signal Rear door RH closed (OFF) → open (ON) 10 kΩ or higher → Below 1 Ω
A-4 (BCTY) - Body ground None - Body ground Back door courtesy light switch signal Back door closed (OFF) → open (ON) 10 kΩ or higher → Below 1 Ω
E118-11 (HCTY) - Body ground L - Body ground Engine hood courtesy switch input signal Engine hood open (OFF) → closed (ON) 10 kΩ or higher → Below 1 Ω


d.

Install the main body ECU (multiplex network body ECU) to the cowl side junction block LH.



e.

Measure the voltage according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
2J-19 (LSFL) - Body ground G - Body ground Front door LH unlock detection switch input signal Front door LH unlocked Below 1 V
Engine switch off, all doors closed and front door LH locked Pulse generation
2J-16 (LSFR) - Body ground B - Body ground Front door RH unlock detection switch input signal Front door RH unlocked Below 1 V
Engine switch off, all doors closed and front door RH locked Pulse generation
2K-33 (LSWL) - Body ground L - Body ground Rear door LH unlock detection switch input signal Rear door LH unlocked Below 1 V
Engine switch off, all doors closed and rear door LH locked Pulse generation
E117-2 (LSWR) - Body ground W - Body ground Rear door RH unlock detection switch input signal Rear door RH unlocked Below 1 V
Engine switch off, all doors closed and rear door RH locked Pulse generation
2H-26 (SH) - Body ground*4 LG - Body ground Security horn drive Security horn sounding
(Theft deterrent system is in alarm sounding state)
Pulse generation
(Below 1 V ← → 11 to 14 V)
E117-18 (SSCL) - Body ground*1 R - Body ground Theft warning siren drive Theft warning siren sounding
(Theft deterrent system is in alarm sounding state)
Pulse generation
(Below 1 V ← → 11 to 14 V)
E117-13 (SSW1) - Body ground*2 L - Body ground Intrusion sensor cancel switch signal Intrusion sensor cancel switch on Below 1 V
Intrusion sensor cancel switch off Pulse generation
E117-12 (ISIF) - Body ground*2 G - Body ground Theft warning ultrasonic sensor signal input
·

No moving object detected by sensor

·

Vehicle tilt not detected


11 to 14 V
Theft deterrent system changes from disarmed state to armed preparation state Pulse generation
(See Waveform 1)
E118-7 (GPBS) - Body ground*3 V - Body ground Glass breakage sensor signal Glass breakage sensor normal Below 2 V
2H-27 (HORN) - Body ground L - Body ground Vehicle horn drive Vehicle horns sounding
(Theft deterrent system is in alarm sounding state)
Pulse generation
(Below 1 V ← → 11 to 14 V)

*1: w/ Theft Warning Siren Assembly

*2: w/ Intrusion Sensor

*3: w/ Glass Breakage Sensor

*4: w/ Security Horn Assembly



f.

Using an oscilloscope, check the waveform.

HINT:

The waveform shown in the illustration is an example for reference only. Noise, chattering, etc. are not shown.


i.

Waveform 1 (Reference)

C256467C03
1.781,0.302 1.917,0.375 false 2.333,0.302 2.448,0.375 false 1.406,0.063 1.656,0.281 0.25,0.219 10 HI 1.385,0.521 1.688,0.781 0.302,0.26 10 LO 1.625,0.229 1.885,0.458 0.26,0.229 10 *a 2.167,0.219 2.427,0.438 0.26,0.219 10 *b 3.979,0.198 4.271,0.448 0.292,0.25 10 *c 3.979,0.719 4.26,0.958 0.281,0.24 10 *d 2.104,0.75 2.354,0.979 0.25,0.229 10 *e 2.51,0.771 2.76,1 0.25,0.229 10 *f 2.656,1.115 2.938,1.333 0.281,0.219 10 *g 1.51,1.51 1.771,1.708 0.26,0.198 10 *h 3.948,1.51 4.24,1.74 0.292,0.229 10 *i
*a IOUT Initial Signal *b IOUT Initial Response
*c Approximately 1.0 Second *d Initial Diagnosis
*e Approximately 1.0 to 1.6 Seconds *f Approximately 0.05 Seconds
*g Approximately 5.5 Seconds *h Disarmed State
*i Arming Preparation State - -


Measurement Condition:
Item Content
Tester Connection E117-12 (ISIF) - Body ground
Tool Setting 2 V/DIV., 100 ms./DIV.
Condition Theft deterrent system changes from armed preparation state to armed state