Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2017.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255487 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  B15C3  Speaker Output Short  


DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
B15C3 A short is detected in the speaker output circuit.
·

Radio and Display Receiver Assembly

·

Speakers

·

Harness or connector



WIRING DIAGRAM

E285156E08
5.656,2.698 6.927,3.208 1.271,0.51 10 false Front No. 1 Speaker Assembly RH 0.042,0.927 1.323,1.365 1.281,0.438 10 false Front No. 2 Speaker Assembly LH 0.042,2.729 1.323,3.167 1.281,0.438 10 false Front No. 1 Speaker Assembly LH 0.031,0.74 1.313,1.177 1.281,0.438 10 false F8 0.042,2.573 1.323,3.01 1.281,0.438 10 false F14 5.656,0.854 6.938,1.292 1.281,0.438 10 false Front No. 2 Speaker Assembly RH 0.396,3.948 1.344,4.385 0.948,0.438 10 false Rear Speaker Set LH 5.656,3.927 6.552,4.365 0.896,0.438 10 false Rear Speaker Set RH 2.927,0.875 3.344,1.042 0.417,0.167 10 false FL+ 2.927,1.26 3.344,1.427 0.417,0.167 10 false FL- 1.823,0.885 1.979,1.052 0.156,0.167 10 false + 4.99,0.885 5.438,1.052 0.448,0.167 10 false + 5.656,0.677 6.104,0.844 0.448,0.167 10 false F7 5.646,2.49 6.094,2.656 0.448,0.167 10 false F13 5.656,3.75 6.198,3.917 0.542,0.167 10 false J18 0.396,3.781 0.938,3.948 0.542,0.167 10 false J19 5,1.25 5.448,1.417 0.448,0.167 10 false - 1.552,1.635 2,1.813 0.448,0.177 10 false TWL+ 1.563,2.021 2,2.188 0.438,0.167 10 false TWL- 2.927,3.771 3.344,3.938 0.417,0.167 10 false RL+ 2.927,4.156 3.344,4.323 0.417,0.167 10 false RL- 3.729,3.76 4.042,3.927 0.313,0.167 10 false RR+ 3.76,4.156 4.042,4.323 0.281,0.167 10 false RR- 2.865,4.813 4.063,5.198 1.198,0.385 10 false Radio and Display Receiver Assembly 3.719,0.896 4.021,1.042 0.302,0.146 10 false FR+ 3.75,1.281 4.021,1.427 0.271,0.146 10 false FR- 4.979,2.01 5.49,2.219 0.51,0.208 10 false TWR- 4.979,1.625 5.49,1.833 0.51,0.208 10 false TWR+ 2.521,3.771 2.969,3.938 0.448,0.167 10 false F122 2.51,0.896 2.958,1.063 0.448,0.167 10 false F120 2.615,0.688 3.063,0.854 0.448,0.167 10 false 2 2.615,1.083 3.063,1.25 0.448,0.167 10 false 6 2.01,0.792 2.458,0.958 0.448,0.167 10 false 1 2.01,1.167 2.458,1.333 0.448,0.167 10 false 3 2.01,1.917 2.458,2.083 0.448,0.167 10 false 4 2,1.552 2.448,1.719 0.448,0.167 10 false 2 2.01,2.479 2.458,2.646 0.448,0.167 10 false 1 2.01,2.865 2.458,3.031 0.448,0.167 10 false 2 2.01,3.656 2.458,3.823 0.448,0.167 10 false 1 2.01,4.042 2.458,4.208 0.448,0.167 10 false 2 4.813,1.167 5.26,1.333 0.448,0.167 10 false 3 4.813,0.771 5.26,0.938 0.448,0.167 10 false 1 4.813,1.906 4.948,2.073 0.135,0.167 10 false 4 4.813,1.531 4.969,1.719 0.156,0.188 10 false 2 4.813,2.479 5.26,2.646 0.448,0.167 10 false 1 4.813,2.865 5.26,3.031 0.448,0.167 10 false 2 4.813,3.656 5.26,3.823 0.448,0.167 10 false 1 4.813,4.042 5.26,4.208 0.448,0.167 10 false 2 2.615,3.573 3.063,3.74 0.448,0.167 10 false 2 2.615,3.969 3.063,4.135 0.448,0.167 10 false 6 4.208,0.677 4.656,0.844 0.448,0.167 10 false 1 4.208,1.083 4.656,1.25 0.448,0.167 10 false 5 4.198,3.573 4.646,3.74 0.448,0.167 10 false 1 4.208,3.969 4.656,4.135 0.448,0.167 10 false 3 1.844,1.229 1.969,1.396 0.125,0.167 10 false - 2.51,1.281 2.958,1.448 0.448,0.167 10 false F120 4.094,0.896 4.542,1.063 0.448,0.167 10 false F120 4.083,1.292 4.531,1.458 0.448,0.167 10 false F120 2.51,4.167 2.958,4.333 0.448,0.167 10 false F122 4.094,3.781 4.542,3.948 0.448,0.167 10 false F122 4.083,4.167 4.531,4.333 0.448,0.167 10 false F122

CAUTION / NOTICE / HINT

HINT:
·

After the inspection is completed, clear the DTCs.

·

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).



PROCEDURE

2.CHECK FOR DTC
a.

Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>DTC CHECK / CLEAR).

OK:

DTC B15C3 is not output.




OK

NG

3.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
3.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

*1: for RH Side

*2: for LH Side


a.

Disconnect the F122 and F120 radio and display receiver assembly connectors.


b.

Disconnect the F13*1 and/or F14*2 front No. 1 speaker assembly connector.


c.

Disconnect the F7*1 and/or F8*2 front No. 2 speaker assembly connector.


d.

Disconnect the J18*1 and/or J19*2 rear speaker set connector.

Standard Resistance:
RH Side
Tester Connection Condition Specified Condition
F120-1 (FR+) - F7-1 (+) Always Below 1 Ω
F120-5 (FR-) - F7-3 (-) Always Below 1 Ω
F7-2 (TWR+) - F13-1 Always Below 1 Ω
F7-4 (TWR-) - F13-2 Always Below 1 Ω
F122-1 (RR+) - J18-1 Always Below 1 Ω
F122-3 (RR-) - J18-2 Always Below 1 Ω
F120-1 (FR+) - Body ground Always 10 kΩ or higher
F120-5 (FR-) - Body ground Always 10 kΩ or higher
F7-2 (TWR+) - Body ground Always 10 kΩ or higher
F7-4 (TWR-) - Body ground Always 10 kΩ or higher
F122-1 (RR+) - Body ground Always 10 kΩ or higher
F122-3 (RR-) - Body ground Always 10 kΩ or higher

LH Side
Tester Connection Condition Specified Condition
F120-2 (FL+) - F8-1 (+) Always Below 1 Ω
F120-6 (FL-) - F8-3 (-) Always Below 1 Ω
F8-2 (TWL+) - F14-1 Always Below 1 Ω
F8-4 (TWL-) - F14-2 Always Below 1 Ω
F122-2 (RL+) - J19-1 Always Below 1 Ω
F122-6 (RL-) - J19-2 Always Below 1 Ω
F120-2 (FL+) - Body ground Always 10 kΩ or higher
F120-6 (FL-) - Body ground Always 10 kΩ or higher
F8-2 (TWL+) - Body ground Always 10 kΩ or higher
F8-4 (TWL-) - Body ground Always 10 kΩ or higher
F122-2 (RL+) - Body ground Always 10 kΩ or higher
F122-6 (RL-) - Body ground Always 10 kΩ or higher




OK

4.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL).


b.

Inspect the front No. 1 speaker assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION).



OK

5.CHECK FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

5.CHECK FRONT NO. 2 SPEAKER ASSEMBLY
a.

Replace the front No. 2 speaker with a known good one (See page Audio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL).


b.

Check that the malfunction disappears.

HINT:
·

Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.

·

When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.



OK:

DTC B15C3 is not output.




OK

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

NG

6.INSPECT REAR SPEAKER SET
6.INSPECT REAR SPEAKER SET
a.


Result
Result Proceed to
OK A
NG B


A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B