Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR SEAT ENTERTAINMENT SYSTEM
RM38G0E _56 Audio / Visual / Telematics _100606 AUDIO / VIDEO _0467498 REAR SEAT ENTERTAINMENT SYSTEM T

AUDIO / VIDEO  REAR SEAT ENTERTAINMENT SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



General Function
Symptom Suspected Area Link
Different contents cannot be selected independently for each television display assembly* Proceed to "Display Mode Signal Circuit between Multi-display Controller and Television Display Assembly" Click here
Television display assembly LH Click here
Television display assembly RH Click here
Multi-display controller Click here
Rear seat Miracast does not connect Proceed to "Does not Connect to Rear-Miracast" Click here
Rear seat DLNA does not connect Proceed to "Does not Connect to Rear-DLNA" Click here

*: However, this is possible for the rear left and rear right seats only when VIDEO is selected for either the left or right seat and another source is selected for the other seat.


Display Function
Symptom Suspected Area Link
A black screen is displayed for the entire screen only for the television display assembly LH (screen is not displayed)/screen is distorted Check that the television display assembly LH is turned on. -
Proceed to "Visual Mute Signal Circuit between Multi-display Controller and Television Display Assembly" Click here
Proceed to "Television Display does not Turn ON" Click here
Proceed to "Power Source Circuit" Click here
Proceed to "Display Signal Circuit between Multi-display Controller and Television Display" Click here
Television Display Assembly LH Click here
Multi-display controller Click here
A black screen is displayed for the entire screen only for the television display assembly RH (screen is not displayed)/screen is distorted Check that the television display assembly RH is turned on. -
Proceed to "Visual Mute Signal Circuit between Multi-display Controller and Television Display Assembly" Click here
Proceed to "Television Display does not Turn ON" Click here
Proceed to "Power Source Circuit" Click here
Proceed to "Display Signal Circuit between Multi-display Controller and Television Display" Click here
Television Display Assembly RH Click here
Multi-display controller Click here
A black screen is displayed for the entire screen for the television display assembly LH and RH (screen is not displayed)/screen is distorted Check that the television display assembly is turned on. -
Proceed to "Power Source Circuit" Click here
Proceed to "Television Display does not Turn ON" Click here
Proceed to "Visual Mute Signal Circuit between Multi-display Controller and Television Display Assembly" Click here
Proceed to "Display Signal Circuit between Multi-display Controller and Television Display" Click here
Television Display Assembly LH Click here
Television Display Assembly RH Click here
Multi-display controller Click here
Color on the display screen is not usual. Adjust the settings for contrast, tint, color and brightness -
Proceed to "Operation Check (Color Bar Check)" Click here
Multi-display controller Click here
Television display assembly LH Click here
Television display assembly RH Click here
Switches of television display assembly LH does not function Check for foreign matter around the switches that might prevent operation -
Proceed to "Operation Check (Hardware Key Check)" Click here
Television display assembly LH Click here
Multi-display controller Click here
Switches of television display assembly RH does not function Check for foreign matter around the switches that might prevent operation -
Proceed to "Operation Check (Hardware Key Check)" Click here
Television display assembly RH Click here
Multi-display controller Click here
Switches of television display assembly LH and RH does not function Check that the rear seat entertainment system is not locked by multi-display -
Multi-display controller Click here
Touch operation of television display assembly LH does not work orreaction is poor Proceed to "Operation Check (Touch SW Check)" Click here
Television display assembly LH Click here
Multi-display controller Click here
Touch operation of television display assembly RH does not work orreaction is poor Proceed to "Operation Check (Touch SW Check)" Click here
Television display assembly RH Click here
Multi-display controller Click here
Touch operation of television display assembly LH and RH does not work orreaction is poor Check that the rear seat entertainment system is not locked by multi-display -
Multi-display controller Click here
Television display assembly does not turn on Check that the rear seat entertainment system is not locked by multi-display -
Proceed to "Power Source Circuit" Click here
Proceed to "Television Display does not Turn ON" Click here
Television display assembly LH Click here
Television display assembly RH Click here
Multi-display controller Click here

Sound Function
Symptom Suspected Area Link
Quality of sound from headphones is poor or no sound can be heard (from one side). Check that the headphone operates normally -
Check that the headphone is connected properly -
Proceed to "Sound Signal Circuit between Multi-display controller and Head-phone Terminal" Click here

HDMI Terminal
Symptom Suspected Area Link
Screen is not displayed/screen is distorted only when playing the device connected to the HDMI terminal Connect other devices to the HDMI terminal and check that video feed is output -
Proceed to "Image or Sound from a Device Connected to the External Input Terminal is not Output" Click here
Sound quality is poor/no sound/sound skips only when playing the device connected to the HDMI terminal Connect other devices to the HDMI terminal and check that video feed is output -
Proceed to "Image or Sound from a Device Connected to the External Input Terminal is not Output" Click here