| *A | for Standard | *B | for Full Cover Type |
| *C | for RH Side | - | - |
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.REMOVE HEADLIGHT ASSEMBLY LH
52116A 2.REMOVE FRONT BUMPER SIDE SUPPORT LH
75602A 3.REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH
75860A 4.REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH (for Standard)
51774C 5.REMOVE STEP PLATE COVER LH (for Full Cover Type)
53806 6.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
| *A | for RH Side | - | - |
|
Clip |
|
Screw |
|
Grommet | - | - |
53828J 7.REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH
|
Remove in this Direction | - | - |
75534 8.REMOVE WINDSHIELD OUTSIDE MOULDING LH
53802 9.REMOVE FRONT FENDER SUB-ASSEMBLY LH
| *1 | Front Side No. 2 Panel Protector LH | - | - |
| *a | Installation bolt (A) | - | - |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Loosen the 4 bolts.
Fold back the front side No. 2 panel protector LH in the direction shown in the illustration so that the front fender LH installation bolt (A) can be removed.
Remove the 10 bolts and front fender sub-assembly LH.
53824B 10.REMOVE FRONT SIDE NO. 2 PANEL PROTECTOR LH