Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM
RM38G0E _58 Vehicle Interior _100610 THEFT DETERRENT / KEYLESS ENTRY _0468612 THEFT DETERRENT SYSTEM Y

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use this procedure to troubleshoot the theft deterrent system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS

Result:
Proceed to
NEXT



NEXT

3.READ OUT AND SAVE VEHICLE CONTROL HISTORY (RoB)*
3.READ OUT AND SAVE VEHICLE CONTROL HISTORY (RoB)*
a.

Read out and save vehicle control history (RoB) using the GTS.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>THEFT DETERRENT SYSTEM>CHECK FOR INTERMITTENT PROBLEMS

Body Electrical > Main Body > Utility
Tester Display
Vehicle Control History (RoB)
50005 449 62

Result:
Proceed to
NEXT



NEXT

4.PRE-CHECK
4.PRE-CHECK
a.

Measure the battery voltage.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

5.SYMPTOM SIMULATION
5.SYMPTOM SIMULATION
Result:
Proceed to
NEXT



NEXT

6.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
6.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
a.

Use the GTS to check if the CAN communication system is functioning normally.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM


Result:
Proceed to
CAN communication system DTC is not output
CAN communication system DTC is output



CAN communication system DTC is not output

7.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

CAN communication system DTC is output

7.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
a.

Use the GTS to check if the LIN communication system is functioning normally.


Result:
Proceed to
LIN communication system DTC is not output
LIN communication system DTC is output



LIN communication system DTC is not output

8.CHECK FOR DTC*

LIN communication system DTC is output

8.CHECK FOR DTC*
a.

Clear the DTCs.

Body Electrical > Main Body > Clear DTCs
50002 449

b.

Recheck for DTCs.

Body Electrical > Main Body > Trouble Codes
50001 449

Result:
Proceed to
DTCs is not output
DTCs is output



DTCs is not output

9.CHECK POWER DOOR LOCK CONTROL SYSTEM

DTCs is output

9.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Refer to the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Power door lock control system is normal A
Power door lock control system is abnormal B



A

10.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

B

10.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Refer to the wireless door lock control system.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Wireless door lock control system is normal A
Wireless door lock control system is abnormal B



A

11.CHECK ENTRY AND START SYSTEM (for Start Function)

B

11.CHECK ENTRY AND START SYSTEM (for Start Function)
a.

Result:
Result Proceed to
Entry and start system (for Start Function) is normal A
Entry and start system (for Start Function) is abnormal B



A

12.CHECK ENTRY AND START SYSTEM (for Entry Function)

B

12.CHECK ENTRY AND START SYSTEM (for Entry Function)
a.

Result:
Proceed to
Entry and start system (for Entry Function) is normal
Entry and start system (for Entry Function) is abnormal



Entry and start system (for Entry Function) is normal

13.CHECK LIGHTING SYSTEM (EXT)

Entry and start system (for Entry Function) is abnormal

13.CHECK LIGHTING SYSTEM (EXT)

Result:
Proceed to
Lighting system (EXT) is normal
Lighting system (EXT) is abnormal



Lighting system (EXT) is normal

14.CHECK LIGHTING SYSTEM (INT)

Lighting system (EXT) is abnormal

14.CHECK LIGHTING SYSTEM (INT)
a.

Refer to the lighting system (INT).

Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Lighting system (INT) is normal (w/ Power Back Door System) A
Lighting system (INT) is normal (w/o Power Back Door System) B
Lighting system (INT) is abnormal C



A

15.CHECK POWER BACK DOOR SYSTEM

B

16.CHECK HORN SYSTEM

C

15.CHECK POWER BACK DOOR SYSTEM
a.

Refer to the power back door system.

Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>OPERATION CHECK


Result:
Proceed to
Power back door system is normal
Power back door system is abnormal



Power back door system is normal

16.CHECK HORN SYSTEM

Power back door system is abnormal

16.CHECK HORN SYSTEM
a.

Refer to the horn system.

Click hereVehicle Exterior>HORN>HORN SYSTEM>PROBLEM SYMPTOMS TABLE


Result:
Proceed to
Horn system is normal
Horn system is abnormal



Horn system is normal

17.CHECK FOR DTC*

Horn system is abnormal

17.CHECK FOR DTC*
a.

Check for DTCs.

Body Electrical > Main Body > Trouble Codes
50001 449

Result:
Proceed to
DTCs are not output
Theft deterrent system DTCs are output



DTCs are not output

18.PROBLEM SYMPTOMS TABLE

Theft deterrent system DTCs are output

18.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table (Fault can be simulated) A
Fault is not listed in Problem Symptoms Table (Fault cannot be simulated) B
Fault is listed in Problem Symptoms Table C



A

19.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*

B

C

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

19.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*

NEXT

20.ADJUST, REPAIR OR REPLACE
20.ADJUST, REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

21.CONFIRMATION TEST
21.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END