Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for Start Function)
RM38G0E _58 Vehicle Interior _100610 THEFT DETERRENT / KEYLESS ENTRY _0467507 ENTRY AND START SYSTEM(for Start Function) Y

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for Start Function)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not perform "Smart Code Reset" (all key ID erasure) until all malfunctions and symptoms have been confirmed and resolved. If all key ID erasure is performed without confirming or resolving malfunctions, key registration will be unable to be performed, resulting in unnecessary part replacement.

·

Make sure that the entry and start system has not been disabled by a customize setting.



HINT:
·

Replace parts related to the wireless door lock control system and entry and start system according to the inspection procedure.

·

If the wireless door lock control system and entry and start system do not operate, check the customize settings and make sure that the wireless door lock control system and entry and start system are not disabled.

·

The wireless door lock control system and entry and start system primarily use the following systems.

-

Power door lock control system

-

Wireless door lock control system

-

Entry and start system (for Entry Function)

-

Entry and start system (for Start Function)

Steering lock function

Immobiliser function



·

If 2 or more electrical key transmitter sub-assemblies are registered to the system, make sure to perform troubleshooting with all of them.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
a.

Confirm how the vehicle was brought to the workshop.

·

Vehicle was driven.

·

Vehicle was towed.


HINT:

The cause of the malfunction may be narrowed down by confirming whether the vehicle was driven or towed.



Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past malfunctions that seem unrelated may also help in some cases.

·

The following 5 items are important points for problem analysis:

What Vehicle model, system name
When Date and time, frequency, whether the problem occurred recently or has been occurring for a long time
Where Whether the problem occurs at specified location
Under what conditions? Whether the doors were locked or unlocked, whether the ignition switch was ON, whether the hybrid control system was starting
How did it happen? Ask the customer for details about the vehicle operating conditions, environment and malfunction.



Result:
Proceed to
NEXT



NEXT

3.BASIC CHECK
3.BASIC CHECK
a.

Measure the battery voltage with the ignition switch off.

Standard voltage:

11 to 14 V


HINT:
·

A simple method to determine whether the battery is depleted is to operate the horn.

·

If the battery voltage is below 11 V, recharge or replace the battery.




b.

Check for blown fuses, open or shorted wire harnesses, improperly connected connectors and other problems in areas that can be visually inspected.


c.

Check the connection of each connector and check them for deformation or damage.


Result:
Proceed to
NEXT



NEXT

4.CHECK DTCS AND SAVE OPERATION HISTORY
4.CHECK DTCS AND SAVE OPERATION HISTORY
a.

Using the GTS, enter the following menus: System Select / Health Check


HINT:
·

If DTCs are output, perform troubleshooting for the DTCs.

·

Save all output DTCs and operation history.

·

Operation history can also be checked using the Utility menu of the GTS.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>CHECK FOR INTERMITTENT PROBLEMS



Result:
Result Proceed to
No DTCs are output A
Wireless door lock system and entry and start system DTCs are output B
DTCs other than wireless door lock system and entry and start system DTCs are output C



A

5.CHECK PROBLEM SYMPTOMS

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

C

GO TO DIAGNOSTIC TROUBLE CODE CHART

5.CHECK PROBLEM SYMPTOMS
a.

Based on the customer problem analysis, check the problem symptoms.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>PROBLEM SYMPTOMS TABLE


Result:
Result Proceed to
The problem symptom can be confirmed A
The problem symptom cannot be confirmed B



A

6.CHECK CUSTOMIZE ITEMS

B

6.CHECK CUSTOMIZE ITEMS
a.

Use the following customize setting methods to confirm that the entry and start system is enabled.

·

Using the GTS

·

Using the multi-display

·

Using manual operation


Check the customize settings.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>CUSTOMIZE PARAMETERS


b.

Use the following customize setting methods to confirm that the wireless door lock system is enabled.

·

Using the GTS

·

Using the multi-display


Check the customize settings.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


HINT:
·

Even when the entry and start system is disabled by a customize setting, the hybrid control system can be started by an emergency key operation.

·

If the entry and start system or wireless door lock control system is disabled, all entry and start functions or wireless functions will not operate.



Result:
Result Proceed to
Wireless door lock control system and entry and start system are enabled A
Entry and start system is disabled B
Wireless door lock system is disabled C



A

7.CHECK POWER DOOR LOCK CONTROL SYSTEM

B

C

7.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Power door lock control system operates properly A
Power door lock control system does not operate properly B



A

8.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

B

GO TO POWER DOOR LOCK CONTROL SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

8.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check the wireless door lock control system.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


Result:
Result Proceed to
All functions operate properly A
Wireless lock/unlock functions do not operate (entry and start functions also do not operate) B
Wireless lock/unlock functions do not operate (entry and start functions operate) C
Door ajar warning function does not operate D
Answer-back (buzzer sounds and hazard lights flash) function does not operate E



A

9.CHECK ENTRY AND START SYSTEM (for Entry Function)

B

GO TO ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions and Wireless Functions do not Operate)

C

REPLACE ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY

D

GO TO LIGHTING SYSTEM (Front/Rear Door Courtesy Switch Circuit)

E

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (No Answer-Back)

9.CHECK ENTRY AND START SYSTEM (for Entry Function)

Result:
Result Proceed to
All functions operate properly A
Entry lock/unlock functions do not operate for all doors (wireless function also does not operate) B
Entry lock/unlock functions do not operate for all doors (wireless function operates) C
Entry lock/unlock functions do not operate only for driver side door D
Entry lock/unlock functions do not operate only for front passenger side door E
Entry lock/unlock functions do not operate only from rear door LH*1 F
Entry lock/unlock functions do not operate only from rear door RH*1 G
Entry lock/unlock functions do not operate only for back door H
Entry lock function does not operate only for driver side door (unlock function operates) I
Entry lock function does not operate only for passenger side door (unlock function operates) J
Entry lock function does not operate only from rear door LH (unlock function operates)*1 K
Entry lock function does not operate only from rear door RH (unlock function operates)*1 L
Entry lock function does not operate only for back door (unlock function operates) M
Entry unlock function does not operate only for driver side door (lock function operates) N
Entry unlock function does not operate only for passenger side door (lock function operates) O
Entry unlock function does not operate only from rear door LH (lock function operates)*1 P
Entry unlock function does not operate only from rear door RH (lock function operates)*1 Q
Entry unlock function does not operate only from back door (lock function operates) R
Entry and start system exterior warning and answer-back buzzer do not sound S
Entry and start system interior warning does not sound T
Entry unlock and unlatch functions do not operate using kick sensor*2 U
Entry lock function does not operate using close and lock Function V


*1: w/ Rear Door Entry Function

*2: w/ Hands Free Power Back Door



A

10.CHECK ENTRY AND START SYSTEM (for Start Function)

B

GO TO ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions and Wireless Functions do not Operate)

C

GO TO ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions do not Operate, but Wireless Functions Operate)

D

GO TO ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Lock and Unlock Functions do not Operate)

E

GO TO ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Lock and Unlock Functions do not Operate)

F

GO TO ENTRY AND START SYSTEM (for Entry Function) (Rear Door LH Entry Lock and Unlock Functions do not Operate)

G

GO TO ENTRY AND START SYSTEM (for Entry Function) (Rear Door RH Entry Lock and Unlock Functions do not Operate)

H

GO TO ENTRY AND START SYSTEM (for Entry Function) (Back Door Entry Lock and Unlock Functions do not Operate)

I

GO TO ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Lock Function does not Operate)

J

GO TO ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Lock Function does not Operate)

K

GO TO ENTRY AND START SYSTEM (for Entry Function) (Rear Door LH Entry Lock Function does not Operate)

L

GO TO ENTRY AND START SYSTEM (for Entry Function) (Rear Door RH Entry Lock Function does not Operate)

M

GO TO ENTRY AND START SYSTEM (for Entry Function) (Back Door Entry Lock Function does not Operate)

N

GO TO ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Unlock Function does not Operate)

O

GO TO ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Unlock Function does not Operate)

P

GO TO ENTRY AND START SYSTEM (for Entry Function) (Rear Door LH Entry Unlock Function does not Operate)

Q

GO TO ENTRY AND START SYSTEM (for Entry Function) (Rear Door RH Entry Unlock Function does not Operate)

R

GO TO ENTRY AND START SYSTEM (for Entry Function) (Back Door Entry Unlock Function does not Operate)

S

GO TO ENTRY AND START SYSTEM (for Entry Function) (Entry Exterior Alarm and Answer-back Buzzer do not Sound)

T

GO TO ENTRY AND START SYSTEM (for Entry Function) (Entry Interior Alarm does not Sound)

U

GO TO ENTRY AND START SYSTEM (for Entry Function) (Entry Unlock and Unlatch Functions do not Operate Using Kick Sensor)

V

GO TO ENTRY AND START SYSTEM (for Entry Function) (Entry Lock Function does not Operate Using Close & Lock Function)

10.CHECK ENTRY AND START SYSTEM (for Start Function)

Result:
Engine was started
Result Proceed to
All functions operate properly A
Power source mode changing function does not operate correctly (power source mode cannot be changed to ACC, but can be changed to ON) B
Steering lock function does not operate C
Security indicator light does not blink D

Engine was not start
Result Proceed to
Push-button start function does not operate E
Immobiliser function does not operate F
Steering wheel cannot be unlocked G
Power source mode changing function does not operate (power source mode cannot be changed to ACC or ON) H
Power source mode changing function does not operate correctly (power source mode can be changed to on ACC, but not ON) I
Immobiliser function does not operate (security indicator light does not turn off) J



A

11.CHECK ELECTRICAL KEY REGISTRATION FUNCTION

B

GO TO ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (ACC))

C

GO TO ENTRY AND START SYSTEM (for Start Function) (Steering Lock does not Lock)

D

GO TO ENTRY AND START SYSTEM (for Start Function) (Security Indicator Light Does not Blink)

E

GO TO ENTRY AND START SYSTEM (for Start Function) (Engine does not Start)

F

GO TO ENTRY AND START SYSTEM (for Start Function) (Immobiliser System does not Operate Properly)

G

GO TO ENTRY AND START SYSTEM (for Start Function) (Unable to Unlock Steering Wheel (Engine does not Start))

H

GO TO ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG and ACC))

I

GO TO ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG))

J

GO TO ENTRY AND START SYSTEM (for Start Function) (Immobiliser System does not Operate Properly)

11.CHECK ELECTRICAL KEY REGISTRATION FUNCTION
a.

Check the electrical key registration function.

Refer to Service Bulletin.


Result:
Result Proceed to
Electrical key registration function operates properly (w/ fingerprint authentication) A
Electrical key registration function operates properly (w/o fingerprint authentication) B
Cannot register new keys C
Cannot register additional keys D
Additional key registration display is not displayed E



A

12.CHECK FINGERPRINT AUTHENTICATION SYSTEM

B

C

GO TO ENTRY AND START SYSTEM (for Start Function) (New Key cannot be Registered)

D

GO TO ENTRY AND START SYSTEM (for Start Function) (Additional Key cannot be Registered)

E

GO TO ENTRY AND START SYSTEM (for Start Function) (New Key Registration Warning Message is not Displayed)

12.CHECK FINGERPRINT AUTHENTICATION SYSTEM
a.

Check the fingerprint authentication system


Result:
Result Proceed to
All functions operate properly A
Fingerprint Authentication Failed and the Engine does not Start B
Cannot Proceed to Fingerprint Registration Screen C
Cannot Enter Fingerprint Registration Mode D
Cannot Complete Fingerprint Registration E
Cannot Delete a Fingerprint/All Fingerprints F
Cannot Change the Fingerprint Authentication Customize Setting G



A

B

GO TO ENTRY AND START SYSTEM (for Start Function) (Fingerprint Authentication Failed and the Engine does not Start)

C

GO TO ENTRY AND START SYSTEM (for Start Function) (Cannot Proceed to Fingerprint Registration Screen)

D

GO TO ENTRY AND START SYSTEM (for Start Function) (Cannot Enter Fingerprint Registration Mode)

E

GO TO ENTRY AND START SYSTEM (for Start Function) (Cannot Complete Fingerprint Registration)

F

GO TO ENTRY AND START SYSTEM (for Start Function) (Cannot Delete a Fingerprint/All Fingerprints)

G

GO TO ENTRY AND START SYSTEM (for Start Function) (Cannot Change the Fingerprint Authentication Customize Setting)