Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2021.04–2021.07
RM38G0E _56 Audio / Visual / Telematics _100607 NAVIGATION / MULTI INFO DISPLAY _0467503 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Speaker Circuit  


DESCRIPTION

If there is a short in a speaker circuit, the stereo component amplifier assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly, telephone transceiver assembly or speakers.

WIRING DIAGRAM

E456861E10
3.104,3.656 4.167,4.115 1.063,0.458 10 false FL+ 3.104,4.063 4.167,4.521 1.063,0.458 10 false FL- 3.771,4.031 4.823,4.49 1.052,0.458 10 false FR- 3.74,3.625 4.792,4.083 1.052,0.458 10 false FR+ 4.594,3.615 5.042,3.813 0.448,0.198 10 false + 4.594,4.042 5.031,4.24 0.438,0.198 10 false - 2.406,3.625 2.813,3.875 0.406,0.25 10 false + 2.427,4.031 2.823,4.271 0.396,0.24 10 false - 2.854,3.521 3.083,3.74 0.229,0.219 10 false 11 2.875,0.698 3.073,0.896 0.198,0.198 10 false 13 3.115,0.792 3.552,1 0.438,0.208 10 false TWL+ 3.115,1.229 3.542,1.448 0.427,0.219 10 false TWL- 3.646,0.792 4.083,0.979 0.438,0.188 10 false TWR+ 3.646,1.208 4.073,1.438 0.427,0.229 10 false TWR- 4.115,0.708 4.333,0.896 0.219,0.188 10 false 14 3.115,5.99 3.406,6.198 0.292,0.208 10 false RL+ 3.125,6.365 3.438,6.583 0.313,0.219 10 false RL- 3.729,5.969 4.083,6.188 0.354,0.219 10 false RR+ 3.771,6.385 4.052,6.604 0.281,0.219 10 false RR- 2.917,5.906 3.083,6.115 0.167,0.208 10 false 4 4.115,5.885 4.323,6.094 0.208,0.208 10 false 12 4.115,2.083 4.323,2.281 0.208,0.198 10 false 10 3.656,2.167 4.052,2.365 0.396,0.198 10 false CTR+ 4.104,3.531 5.167,3.99 1.063,0.458 10 false 15 2.854,3.927 3.042,4.135 0.188,0.208 10 false 26 2.875,1.115 3.104,1.323 0.229,0.208 10 false 28 4.115,1.125 4.302,1.344 0.188,0.219 10 false 29 2.844,6.302 3.042,6.51 0.198,0.208 10 false 19 4.115,6.313 4.365,6.521 0.25,0.208 10 false 27 3.698,2.594 4.063,2.781 0.365,0.188 10 false CTR- 4.104,2.51 4.302,2.708 0.198,0.198 10 false 25 4.094,3.948 5.156,4.406 1.063,0.458 10 false 30 0.594,0.656 1.656,1.115 1.063,0.458 10 false L2 5.24,0.656 6.302,1.115 1.063,0.458 10 false J2 4.427,0.708 5.49,1.167 1.063,0.458 10 false 2 4.427,1.135 5.49,1.594 1.063,0.458 10 false 1 4.594,0.792 4.76,0.969 0.167,0.177 10 false + 4.604,1.188 4.76,1.396 0.156,0.208 10 false - 4.615,2.188 5.677,2.646 1.063,0.458 10 false + 4.615,2.583 4.75,2.771 0.135,0.188 10 false - 4.417,2.094 5.479,2.552 1.063,0.458 10 false 2 4.406,2.531 5.469,2.99 1.063,0.458 10 false 1 2.625,0.698 3.688,1.156 1.063,0.458 10 false 2 2.635,1.115 2.792,1.302 0.156,0.188 10 false 1 2.448,0.781 2.583,0.99 0.135,0.208 10 false + 2.458,1.219 2.573,1.375 0.115,0.156 10 false - 1.792,5.115 2.667,5.615 0.875,0.5 10 false I146 4.177,4.99 5.052,5.49 0.875,0.5 10 false I145 6.094,4.458 6.969,4.958 0.875,0.5 10 false M9 0.125,4.417 1,4.917 0.875,0.5 10 false N7 5.229,5.875 6.104,6.375 0.875,0.5 10 false O11 0.719,5.875 1.594,6.375 0.875,0.5 10 false P11 0.146,6.813 1.021,7.313 0.875,0.5 10 false P9 6.115,6.854 6.99,7.354 0.875,0.5 10 false O10 5.521,4.521 5.688,4.698 0.167,0.177 10 false + 2.156,4.552 3.219,5.01 1.063,0.458 10 false TWR+ 1.531,4.51 1.688,4.688 0.156,0.177 10 false + 5.531,4.813 5.667,4.99 0.135,0.177 10 false - 1.563,4.833 1.698,5.031 0.135,0.198 10 false - 4.396,3.521 5.458,3.979 1.063,0.458 10 false 4 4.396,3.927 5.458,4.385 1.063,0.458 10 false 2 2.646,3.542 3.708,4 1.063,0.458 10 false 4 2.635,3.958 3.698,4.417 1.063,0.458 10 false 2 5.031,4.438 6.094,4.896 1.063,0.458 10 false 3 5.031,4.76 6.094,5.219 1.063,0.458 10 false 1 5.344,4.75 6.406,5.208 1.063,0.458 10 false 1 1.99,4.771 3.052,5.229 1.063,0.458 10 false 1 1.708,4.771 2.771,5.229 1.063,0.458 10 false 1 2.427,5.99 2.792,6.167 0.365,0.177 10 false + 4.615,5.969 4.99,6.177 0.375,0.208 10 false + 4.635,6.385 4.938,6.573 0.302,0.188 10 false - 2.438,6.406 2.75,6.604 0.313,0.198 10 false - 4.865,6.896 5.052,7.104 0.188,0.208 10 false + 5.531,6.896 6.021,7.135 0.49,0.24 10 false WF+ 5.531,7.177 5.917,7.365 0.385,0.188 10 false WF- 4.885,7.198 5.021,7.375 0.135,0.177 10 false - 2.198,7.198 2.323,7.417 0.125,0.219 10 false - 2.188,6.885 2.323,7.073 0.135,0.188 10 false + 1.292,6.896 1.75,7.125 0.458,0.229 10 false WF+ 1.302,7.198 1.698,7.406 0.396,0.208 10 false WF- 1.99,4.448 3.052,4.906 1.063,0.458 10 false 3 5.354,4.448 6.417,4.906 1.063,0.458 10 false 2 1.719,4.448 2.781,4.906 1.063,0.458 10 false 2 2.552,8.219 5.135,8.448 2.583,0.229 10 false S22 4.427,5.885 4.594,6.073 0.167,0.188 10 false 4 4.427,6.313 4.573,6.5 0.146,0.188 10 false 2 2.635,6.302 2.813,6.51 0.177,0.208 10 false 2 2.635,5.896 2.823,6.125 0.188,0.229 10 false 4 1.99,6.813 3.052,7.271 1.063,0.458 10 false 3 1.979,7.156 3.042,7.615 1.063,0.458 10 false 1 1.708,7.135 2.771,7.594 1.063,0.458 10 false 1 1.708,6.813 2.771,7.271 1.063,0.458 10 false 2 5.063,6.823 6.125,7.281 1.063,0.458 10 false 3 5.063,7.125 6.125,7.583 1.063,0.458 10 false 1 5.333,6.823 6.396,7.281 1.063,0.458 10 false 2 5.333,7.135 6.396,7.594 1.063,0.458 10 false 1 5.25,2.094 6.313,2.552 1.063,0.458 10 false K2 5.26,2.26 6.531,2.708 1.271,0.448 10 false Front No. 4 Speaker Assembly 0.594,0.844 1.865,1.292 1.271,0.448 10 false Front No. 3 Speaker Assembly LH 5.24,0.865 6.51,1.313 1.271,0.448 10 false Front No. 3 Speaker Assembly RH 2.552,8.385 5.135,8.615 2.583,0.229 10 false Stereo Component Amplifier Assembly 4.177,5.135 5.438,5.615 1.26,0.479 10 false Front No. 2 Speaker Assembly RH 1.802,5.26 3.073,5.708 1.271,0.448 10 false Front No. 2 Speaker Assembly LH 6.104,4.615 6.99,5.24 0.885,0.625 10 false Front No. 1 Speaker Assembly RH 0.125,4.573 0.958,5.115 0.833,0.542 10 false Front No. 1 Speaker Assembly LH 5.229,6.063 6.458,6.5 1.229,0.438 10 false Rear No. 2 Speaker Assembly RH 6.104,7.01 6.979,7.406 0.875,0.396 10 false Rear Speaker Assembly RH 0.156,6.969 1.021,7.385 0.865,0.417 10 false Rear Speaker Assembly LH 0.688,6.042 1.917,6.479 1.229,0.438 10 false Rear No. 2 Speaker Assembly LH 0.125,0.115 1.396,0.375 1.271,0.26 12 false for 14 Speakers: 2.167,4.875 3.229,5.333 1.063,0.458 10 false TWR- 4.573,4.521 5.635,4.979 1.063,0.458 10 false TWR+ 4.583,4.854 5.646,5.313 1.063,0.458 10 false TWR-

E456862E12
3.646,3.25 4.083,3.438 0.438,0.188 10 false WF2+ 4.146,3.198 5.5,3.583 1.354,0.385 10 false 7 3.646,2.417 4.063,2.635 0.417,0.219 10 false WF1+ 4.146,2.354 5.5,2.74 1.354,0.385 10 false 8 3.125,1.146 3.458,1.344 0.333,0.198 10 false SL+ 3.135,1.583 3.438,1.771 0.302,0.188 10 false SL- 3.76,1.563 4.073,1.792 0.313,0.229 10 false SR- 3.74,1.146 4.052,1.354 0.313,0.208 10 false SR+ 2.906,1.063 3.104,1.25 0.198,0.188 10 false 5 4.146,1.083 4.271,1.292 0.125,0.208 10 false 9 4.125,3.615 5.479,4 1.354,0.385 10 false 22 3.667,3.667 4.115,3.896 0.448,0.229 10 false WF2- 3.667,2.833 4.104,3.031 0.438,0.198 10 false WF1- 4.125,2.781 5.479,3.167 1.354,0.385 10 false 23 4.156,1.479 4.344,1.688 0.188,0.208 10 false 24 2.865,1.479 3.094,1.698 0.229,0.219 10 false 20 2.573,4.01 3.927,4.417 1.354,0.406 10 false S22 5.688,1.052 6.729,1.469 1.042,0.417 10 false g12 0.26,1.021 1.302,1.438 1.042,0.417 10 false g13 5.219,2.417 6.26,2.833 1.042,0.417 10 false T16 4.594,2.427 5.083,2.625 0.49,0.198 10 false WF1+ 4.604,2.844 5.052,3.042 0.448,0.198 10 false WF1- 4.615,3.25 5.063,3.469 0.448,0.219 10 false WF2+ 4.604,3.667 4.979,3.875 0.375,0.208 10 false WF2- 4.417,2.365 5.792,2.75 1.375,0.385 10 false 2 4.417,2.781 5.792,3.167 1.375,0.385 10 false 1 4.417,3.188 5.792,3.573 1.375,0.385 10 false 4 4.427,3.625 5.802,4.01 1.375,0.385 10 false 3 5,1.156 5.438,1.365 0.438,0.208 10 false RRD+ 5.021,1.573 5.458,1.802 0.438,0.229 10 false RRD- 1.813,1.573 2.208,1.802 0.396,0.229 10 false RLD- 1.781,1.177 2.198,1.438 0.417,0.26 10 false RLD+ 4.813,1.083 6.167,1.469 1.354,0.385 10 false 2 4.813,1.5 6.167,1.885 1.354,0.385 10 false 1 2.24,1.51 3.594,1.896 1.354,0.385 10 false 1 2.24,1.094 3.594,1.479 1.354,0.385 10 false 2 0.271,1.198 1.49,1.656 1.219,0.458 10 false Rear No. 3 Speaker Assembly LH 5.688,1.229 6.906,1.688 1.219,0.458 10 false Rear No. 3 Speaker Assembly RH 5.25,2.594 6.438,3.063 1.188,0.469 10 false No. 1 Speaker with Box Assembly 2.563,4.188 5.104,4.469 2.542,0.281 10 false Stereo Component Amplifier Assembly

E465230E07
3.125,3.604 3.427,3.802 0.302,0.198 10 false FL+ 3.125,4.021 3.385,4.229 0.26,0.208 10 false FL- 3.771,4.01 4.083,4.208 0.313,0.198 10 false FR- 3.74,3.594 4.073,3.813 0.333,0.219 10 false FR+ 2.927,3.521 3.104,3.698 0.177,0.177 10 false 4 2.865,0.698 3.094,0.906 0.229,0.208 10 false 12 3.115,0.792 3.531,0.99 0.417,0.198 10 false TWL+ 3.115,1.208 3.51,1.406 0.396,0.198 10 false TWL- 3.646,0.781 4.094,0.958 0.448,0.177 10 false TWR+ 3.667,1.188 4.073,1.396 0.406,0.208 10 false TWR- 4.115,0.688 4.333,0.896 0.219,0.208 10 false 13 3.115,5.99 3.406,6.167 0.292,0.177 10 false RL+ 3.125,6.385 3.385,6.552 0.26,0.167 10 false RL- 3.74,5.969 4.063,6.167 0.323,0.198 10 false RR+ 3.771,6.385 4.052,6.615 0.281,0.229 10 false RR- 2.906,5.896 3.083,6.094 0.177,0.198 10 false 8 4.146,5.896 4.281,6.094 0.135,0.198 10 false 9 4.125,2.094 4.313,2.281 0.188,0.188 10 false 7 3.667,2.167 4.083,2.344 0.417,0.177 10 false CTR+ 4.135,3.51 4.292,3.677 0.156,0.167 10 false 5 2.865,3.948 3.094,4.156 0.229,0.208 10 false 19 2.875,1.104 3.094,1.302 0.219,0.198 10 false 27 4.115,1.104 4.365,1.323 0.25,0.219 10 false 28 2.875,6.323 3.052,6.521 0.177,0.198 10 false 23 4.104,6.302 4.323,6.49 0.219,0.188 10 false 24 3.698,2.583 4.073,2.802 0.375,0.219 10 false CTR- 4.125,2.531 4.323,2.729 0.198,0.198 10 false 22 4.115,3.938 4.344,4.115 0.229,0.177 10 false 20 0.594,0.656 1.656,1.115 1.063,0.458 10 false L1 5.24,0.656 6.302,1.115 1.063,0.458 10 false J3 4.427,0.708 5.49,1.167 1.063,0.458 10 false 2 4.427,1.135 5.49,1.594 1.063,0.458 10 false 1 4.594,0.813 4.781,0.99 0.188,0.177 10 false + 4.604,1.188 4.729,1.438 0.125,0.25 10 false - 4.615,2.188 5.677,2.646 1.063,0.458 10 false + 4.604,2.594 4.771,2.781 0.167,0.188 10 false - 4.417,2.094 5.479,2.552 1.063,0.458 10 false 2 4.406,2.531 5.469,2.99 1.063,0.458 10 false 1 2.625,0.698 3.688,1.156 1.063,0.458 10 false 2 2.635,1.104 2.771,1.302 0.135,0.198 10 false 1 2.438,0.771 2.573,0.948 0.135,0.177 10 false + 2.458,1.198 2.604,1.385 0.146,0.188 10 false - 5.281,3.583 5.5,3.76 0.219,0.177 10 false M9 1.031,3.542 1.323,3.75 0.292,0.208 10 false N7 1.021,6.031 1.469,6.24 0.448,0.208 10 false P10 5.292,5.958 5.552,6.146 0.26,0.188 10 false O9 4.604,3.583 4.729,3.76 0.125,0.177 10 false + 4.615,4.021 4.781,4.219 0.167,0.198 10 false - 4.438,3.948 4.594,4.135 0.156,0.188 10 false 1 2.625,3.958 2.75,4.156 0.125,0.198 10 false 1 2.25,6.385 2.573,6.615 0.323,0.229 10 false WF- 2.219,6 2.688,6.177 0.469,0.177 10 false WF+ 2.635,3.521 2.813,3.708 0.177,0.188 10 false 2 4.438,3.521 4.604,3.688 0.167,0.167 10 false 2 2.552,8.219 5.135,8.448 2.583,0.229 10 false S22 2.635,6.323 2.771,6.542 0.135,0.219 10 false 1 2.635,5.896 2.76,6.094 0.125,0.198 10 false 2 4.417,5.896 4.583,6.073 0.167,0.177 10 false 2 4.427,6.313 4.594,6.5 0.167,0.188 10 false 1 5.25,2.156 5.594,2.323 0.344,0.167 10 false K1 5.26,2.333 6.531,2.781 1.271,0.448 10 false Front No. 4 Speaker Assembly 0.594,0.844 1.865,1.292 1.271,0.448 10 false Front No. 3 Speaker Assembly LH 5.24,0.865 6.51,1.313 1.271,0.448 10 false Front No. 3 Speaker Assembly RH 2.552,8.385 5.135,8.615 2.583,0.229 10 false Stereo Component Amplifier Assembly 5.281,3.75 6.167,4.375 0.885,0.625 10 false Front No. 1 Speaker Assembly RH 1.031,3.688 1.865,4.229 0.833,0.542 10 false Front No. 1 Speaker Assembly LH 5.292,6.104 6.167,6.5 0.875,0.396 10 false Rear Speaker Assembly RH 1.021,6.177 1.885,6.594 0.865,0.417 10 false Rear Speaker Assembly LH 0.125,0.135 1.406,0.385 1.281,0.25 12 false for 10 Speakers: 2.458,3.635 2.583,3.813 0.125,0.177 10 false + 2.469,4.042 2.635,4.24 0.167,0.198 10 false - 4.635,6.021 5.104,6.198 0.469,0.177 10 false WF+ 4.646,6.385 4.969,6.615 0.323,0.229 10 false WF-

E465231E02
3.625,1.885 4.083,2.083 0.458,0.198 10 false WF1+ 4.146,1.771 4.292,1.979 0.146,0.208 10 false 6 3.646,2.292 4.063,2.49 0.417,0.198 10 false WF1- 4.125,2.198 4.323,2.385 0.198,0.188 10 false 21 2.573,4.01 3.927,4.417 1.354,0.406 10 false S22 5.26,1.875 5.573,2.052 0.313,0.177 10 false T15 4.604,1.875 5.042,2.063 0.438,0.188 10 false WF1+ 4.604,2.302 5.042,2.51 0.438,0.208 10 false WF1- 4.417,1.771 4.573,1.979 0.156,0.208 10 false 2 4.427,2.188 4.615,2.375 0.188,0.188 10 false 1 5.281,2.052 6.469,2.521 1.188,0.469 10 false No. 1 Speaker with Box Assembly 2.563,4.188 5.104,4.469 2.542,0.281 10 false Stereo Component Amplifier Assembly

CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION


PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check the vehicle type.


Result:
Result Proceed to
for 14 Speakers A
for 10 Speakers B



A

2.CHECK SPEAKER (OPERATION CHECK)

B

16.CHECK SPEAKER (OPERATION CHECK)
2.CHECK SPEAKER (OPERATION CHECK)
a.
E385362

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

HINT:

If sound cannot be heard from any speaker, inspect all of them.



Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly and front No. 2 speaker assembly A
Front No. 3 speaker assembly and front No. 4 speaker assembly B
Rear No. 2 speaker assembly and rear speaker assembly C
Rear No. 3 speaker assembly D
No. 1 speaker with box assembly E



A

3.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

B

6.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

C

9.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

D

12.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

E

14.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
3.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the M9 and N7 front No. 1 speaker assembly connectors.


c.

Disconnect the I145 and I146 front No. 2 speaker assembly connectors.


d.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,I146,N7,I145,M9)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(I146)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Front No. 3 Speaker Assembly LH

Click Connector(N7)Body>Front Door Wire LH>Front No. 1 Speaker Assembly LH

Click Connector(I145)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Front No. 3 Speaker Assembly RH

Click Connector(M9)Body>Front Door Wire RH>Front No. 1 Speaker Assembly RH

S22-11 (FL+) - I146-4 (+) Always Below 1 Ω
S22-26 (FL-) - I146-2 (-) Always Below 1 Ω
I146-3 (TWR+) - N7-2 (+) Always Below 1 Ω
I146-1 (TWR-) - N7-1 (-) Always Below 1 Ω
S22-15 (FR+) - I145-4 (+) Always Below 1 Ω
S22-30 (FR-) - I145-2 (-) Always Below 1 Ω
I145-3 (TWR+) - M9-2 (+) Always Below 1 Ω
I145-1 (TWR-) - M9-1 (-) Always Below 1 Ω
S22-11 (FL+) - Body ground Always 10 kΩ or higher
S22-26 (FL-) - Body ground Always 10 kΩ or higher
I146-3 (TWR+) - Body ground Always 10 kΩ or higher
I146-1 (TWR-) - Body ground Always 10 kΩ or higher
S22-15 (FR+) - Body ground Always 10 kΩ or higher
S22-30 (FR-) - Body ground Always 10 kΩ or higher
I145-3 (TWR+) - Body ground Always 10 kΩ or higher
I145-1 (TWR-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

OK

5.CHECK FRONT NO.2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

5.CHECK FRONT NO.2 SPEAKER ASSEMBLY
a.

Replace the front No. 2 speaker assembly with a new or known good one.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>PILLAR SPEAKER>REMOVAL


b.

Check the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.




Result:
Proceed to
OK
NG



OK

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

NG

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

6.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the J2 and L2 front No. 3 speaker assembly connectors.


c.

Disconnect the K2 front No. 4 speaker assembly connector.


d.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,J2,L2,K2)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(J2)Instrument Panel>No. 2 Instrument Panel Wire>Front No. 2 Speaker Assembly RH

Click Connector(L2)Instrument Panel>No. 4 Instrument Panel Wire>Front No. 2 Speaker Assembly LH

Click Connector(K2)Instrument Panel>No. 3 Instrument Panel Wire>Front No. 4 Speaker Assembly

S22-14 (TWR+) - J2-2 (+) Always Below 1 Ω
S22-29 (TWR-) - J2-1 (-) Always Below 1 Ω
S22-13 (TWL+) - L2-2 (+) Always Below 1 Ω
S22-28 (TWL-) - L2-1 (-) Always Below 1 Ω
S22-10 (CTR+) - K2-2 (+) Always Below 1 Ω
S22-25 (CTR-) - K2-1 (-) Always Below 1 Ω
S22-14 (TWR+) - Body ground Always 10 kΩ or higher
S22-29 (TWR-) - Body ground Always 10 kΩ or higher
S22-13 (TWL+) - Body ground Always 10 kΩ or higher
S22-28 (TWL-) - Body ground Always 10 kΩ or higher
S22-10 (CTR+) - Body ground Always 10 kΩ or higher
S22-25 (CTR-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

7.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

OK

8.INSPECT FRONT NO. 4 SPEAKER ASSEMBLY

NG

8.INSPECT FRONT NO. 4 SPEAKER ASSEMBLY

OK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

9.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the O10 and P9 rear speaker assembly connectors.


c.

Disconnect the O11 and P11 rear No. 2 speaker assembly connectors.


d.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,O11,O10,P11,P9)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(O11)Body>No. 1 Rear Door Wire>No. 2 Rear Speaker Assembly RH

Click Connector(O10)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

Click Connector(P11)Body>No. 2 Rear Door Wire>No. 2 Rear Speaker Assembly LH

Click Connector(P9)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

S22-12 (RR+) - O11-4 (+) Always Below 1 Ω
S22-27 (RR-) - O11-2 (-) Always Below 1 Ω
O11-3 (+) - O10-2 (WF+) Always Below 1 Ω
O11-1 (-) - O10-1 (WF-) Always Below 1 Ω
S22-4 (RL+) - P11-4 (+) Always Below 1 Ω
S22-19 (RL-) - P11-2 (-) Always Below 1 Ω
P11-3 (+) - P9-2 (WF+) Always Below 1 Ω
P11-1 (-) - P9-1 (WF-) Always Below 1 Ω
S22-12 (RR+) - Body ground Always 10 kΩ or higher
S22-27 (RR-) - Body ground Always 10 kΩ or higher
O11-3 (+) - Body ground Always 10 kΩ or higher
O11-1 (-) - Body ground Always 10 kΩ or higher
S22-4 (RL+) - Body ground Always 10 kΩ or higher
S22-19 (RL-) - Body ground Always 10 kΩ or higher
P11-3 (+) - Body ground Always 10 kΩ or higher
P11-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

10.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

10.INSPECT REAR SPEAKER ASSEMBLY

OK

11.CHECK REAR NO. 2 SPEAKER ASSEMBLY

NG

11.CHECK REAR NO. 2 SPEAKER ASSEMBLY
a.

Replace the rear No. 2 speaker assembly with a new or known good one.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL


b.

Check the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left rear speaker is defective, inspect by interchanging the right one with the left one.




Result:
Proceed to
OK
NG



OK

END (REAR NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

NG

REPLACE REAR NO.2 SPEAKER ASSEMBLY

12.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the g12 and g13 rear No. 3 speaker assembly connectors.


c.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,g12,g13)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(g12)Body>No. 1 Rear Window Wire / No. 2 Back Door Wire>No. 3 Rear Speaker Assembly RH

Click Connector(g13)Body>No. 1 Rear Window Wire / No. 2 Back Door Wire>No. 3 Rear Speaker Assembly LH

S22-9 (SR+) - g12-2 (RRD+) Always Below 1 Ω
S22-24 (SR-) - g12-1 (RRD-) Always Below 1 Ω
S22-5 (SL+) - g13-2 (RLD+) Always Below 1 Ω
S22-20 (SL-) - g13-1 (RLD-) Always Below 1 Ω
S22-9 (SR+) - Body ground Always 10 kΩ or higher
S22-24 (SR-) - Body ground Always 10 kΩ or higher
S22-5 (SL+) - Body ground Always 10 kΩ or higher
S22-20 (SL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

13.INSPECT REAR NO. 3 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

13.INSPECT REAR NO. 3 SPEAKER ASSEMBLY

OK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

REPLACE REAR NO. 3 SPEAKER ASSEMBLY

14.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the T16 No. 1 speaker with box assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,T16)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(T16)Body>No. 3 Floor Wire / Theft Warning Sensor Cord Sub-Assembly>No. 1 Speaker with Box Assembly

S22-8 (WF1+) - T16-2 (WF1+) Always Below 1 Ω
S22-23 (WF1-) - T16-1 (WF1-) Always Below 1 Ω
S22-7 (WF2+) - T16-4 (WF2+) Always Below 1 Ω
S22-22 (WF2-) - T16-3 (WF2-) Always Below 1 Ω
S22-8 (WF1+) - Body ground Always 10 kΩ or higher
S22-23 (WF1-) - Body ground Always 10 kΩ or higher
S22-7 (WF2+) - Body ground Always 10 kΩ or higher
S22-22 (WF2-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

15.INSPECT NO. 1 SPEAKER WITH BOX ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

15.INSPECT NO. 1 SPEAKER WITH BOX ASSEMBLY

OK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

REPLACE NO. 1 SPEAKER WITH BOX ASSEMBLY

16.CHECK SPEAKER (OPERATION CHECK)
a.
E385362

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

HINT:

If sound cannot be heard from any speaker, inspect all of them.



Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly A
Front No. 3 speaker assembly and front No. 4 speaker assembly B
Rear speaker assembly C
No. 1 speaker with box assembly D



A

17.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

B

19.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

C

22.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

D

24.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
17.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the M9 and N7 front No. 1 speaker assembly connectors.


c.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,N7,M9)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(N7)Body>Front Door Wire LH>Front No. 1 Speaker Assembly LH

Click Connector(M9)Body>Front Door Wire RH>Front No. 1 Speaker Assembly RH

S22-4 (FL+) - N7-2 (+) Always Below 1 Ω
S22-19 (FL-) - N7-1 (-) Always Below 1 Ω
S22-5 (FR+) - M9-2 (+) Always Below 1 Ω
S22-20 (FR-) - M9-1 (-) Always Below 1 Ω
S22-4 (FL+) - Body ground Always 10 kΩ or higher
S22-19 (FL-) - Body ground Always 10 kΩ or higher
S22-5 (FR+) - Body ground Always 10 kΩ or higher
S22-20 (FR-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

18.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

18.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

OK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

19.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the J3 and L1 front No. 3 speaker assembly connectors.


c.

Disconnect the K1 front No. 4 speaker assembly connector.


d.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,J3,L1,K1)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(J3)Instrument Panel>No. 2 Instrument Panel Wire>Front No. 2 Speaker Assembly RH

Click Connector(L1)Instrument Panel>No. 4 Instrument Panel Wire>Front No. 2 Speaker Assembly LH

Click Connector(K1)Instrument Panel>No. 3 Instrument Panel Wire>Front No. 4 Speaker Assembly

S22-13 (TWR+) - J3-2 (+) Always Below 1 Ω
S22-28 (TWR-) - J3-1 (-) Always Below 1 Ω
S22-12 (TWL+) - L1-2 (+) Always Below 1 Ω
S22-27 (TWL-) - L1-1 (-) Always Below 1 Ω
S22-7 (CTR+) - K1-2 (+) Always Below 1 Ω
S22-22 (CTR-) - K1-1 (-) Always Below 1 Ω
S22-13 (TWR+) - Body ground Always 10 kΩ or higher
S22-28 (TWR-) - Body ground Always 10 kΩ or higher
S22-12 (TWL+) - Body ground Always 10 kΩ or higher
S22-27 (TWL-) - Body ground Always 10 kΩ or higher
S22-7 (CTR+) - Body ground Always 10 kΩ or higher
S22-22 (CTR-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

20.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

20.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

OK

21.INSPECT FRONT NO. 4 SPEAKER ASSEMBLY

NG

21.INSPECT FRONT NO. 4 SPEAKER ASSEMBLY

OK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

22.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the O9 and P10 rear speaker assembly connectors.


c.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,O9,P10)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(O9)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

Click Connector(P10)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

S22-9 (RR+) - O9-2 (WF+) Always Below 1 Ω
S22-24 (RR-) - O9-1 (WF-) Always Below 1 Ω
S22-8 (RL+) - P10-2 (WF+) Always Below 1 Ω
S22-23 (RL-) - P10-1 (WF-) Always Below 1 Ω
S22-9 (RR+) - Body ground Always 10 kΩ or higher
S22-24 (RR-) - Body ground Always 10 kΩ or higher
S22-8 (RL+) - Body ground Always 10 kΩ or higher
S22-23 (RL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

23.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

23.INSPECT REAR SPEAKER ASSEMBLY

OK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

24.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
a.

Disconnect the S22 stereo component amplifier assembly connector.


b.

Disconnect the T15 No. 1 speaker with box assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S22,T15)Location & Routing

Click Connector(S22)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Stereo Component Amplifier Assembly

Click Connector(T15)Body>No. 3 Floor Wire / Theft Warning Sensor Cord Sub-Assembly>No. 1 Speaker with Box Assembly

S22-6 (WF1+) - T15-2 (WF1+) Always Below 1 Ω
S22-21 (WF1-) - T15-1 (WF1-) Always Below 1 Ω
S22-6 (WF1+) - Body ground Always 10 kΩ or higher
S22-21 (WF1-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

25.INSPECT NO. 1 SPEAKER WITH BOX ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

25.INSPECT NO. 1 SPEAKER WITH BOX ASSEMBLY

OK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

REPLACE NO. 1 SPEAKER WITH BOX ASSEMBLY