| *A | for Standard | *B | for Full Cover Type |
| *C | for RH Side | *D | w/ Snorkel Air Cleaner |
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
17730 1.REMOVE AIR WITH HOSE PRECLEANER ASSEMBLY (w/ Snorkel Air Cleaner)
2.REMOVE HEADLIGHT ASSEMBLY LH
52116A 3.REMOVE FRONT BUMPER SIDE SUPPORT LH
75602A 4.REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH
75860A 5.REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH (for Standard)
51774C 6.REMOVE STEP PLATE COVER LH (for Full Cover Type)
53806 7.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
| *A | for RH Side | - | - |
|
Clip |
|
Screw |
|
Grommet | - | - |
53828J 8.REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH
|
Remove in this Direction | - | - |
75534 9.REMOVE WINDSHIELD OUTSIDE MOULDING LH
53802 10.REMOVE FRONT FENDER SUB-ASSEMBLY LH
| *1 | Front Side No. 2 Panel Protector LH | - | - |
| *a | Installation bolt (A) | - | - |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Loosen the 4 bolts.
Fold back the front side No. 2 panel protector LH in the direction shown in the illustration so that the front fender LH installation bolt (A) can be removed.
Remove the 10 bolts and front fender sub-assembly LH.
53824B 11.REMOVE FRONT SIDE NO. 2 PANEL PROTECTOR LH