| Front wipers do not operate at all
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Windshield wiper motor assembly
|
|
| Front wipers do not operate in AUTO
|
Check that the driver side and passenger side doors are closed
|
-
|
| Rain sensor tape (check for air bubbles)
|
-
|
| Proceed to "Wiper and Washer Switch Circuit"
|
|
| Rain sensor
|
|
| Front wipers do not operate in LO
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers do not operate in HI
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers do not operate in MIST
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| When the front wipers are operating in AUTO, the rain sensor sensitivity cannot be adjusted by the windshield wiper switch assembly (adjustment switch) (wiping interval does not change)
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Windshield wiper motor assembly
|
|
| When the front wipers operate in AUTO, the wiper interval does not change according to changes in the vehicle speed
|
Rain sensor
|
|
| Windshield wiper motor assembly
|
|
| Front wipers do not operate in INT*
|
Windshield wiper motor assembly
|
|
| When the front wipers are operating in INT, the front wiper intermittent operation interval cannot be adjusted by the windshield wiper switch assembly (adjustment switch) (wiping interval does not change)*
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Windshield wiper motor assembly
|
|
| When the front wipers are operating in INT, the front wiper intermittent operation interval does not change according to changes in the vehicle speed*
|
Windshield wiper motor assembly
|
|
| Front wipers continuously operate in AUTO
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers continuously operate in LO
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers continuously operate in HI
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers continuously operate in INT*
|
Windshield wiper motor assembly
|
|
| When the front wipers are operating in AUTO, the front wipers do not stop operating when the driver door or front passenger door is opened
|
Proceed to "Door Courtesy Switch Circuit"
|
|
| Main body ECU (multiplex network body ECU)
|
|
| Windshield wiper motor assembly
|
|
| "Wiper System Malfunction Visit Your Dealer" is displayed on the multi-information display
|
Windshield wiper motor assembly
|
|
| Main body ECU (multiplex network body ECU)
|
|
| Front wipers do not move to the service position (wiper operation is normal)
|
Main body ECU (multiplex network body ECU)
|
|
| When the setting of the customize setting "Auto Wiper" is changed, the operation of the wiper system does not change.
|
Rain sensor
|
|
| Washer motor and pump assembly does not operate
|
Proceed to "Washer Motor Circuit"
|
|
| Proceed to "Wiper and Washer Switch Circuit"
|
|
| Washer fluid does not flow (Washer motor and pump assembly is normal)
|
Washer fluid
|
-
|
| Washer hose and nozzle
|
-
|
| Front wipers do not operate when the windshield wiper switch assembly (washer switch) is on
|
Windshield wiper motor assembly
|
|
| When the front wiper switch is turned off, the front wipers do not move to the park position or stop in the wrong position
|
Check the automatic stop (park) position
|
|
| Main body ECU (multiplex network body ECU)
|
|
| The wiper(s) may not operate
|
Check history of reason for operation
|
|